Replacement Rear Shocktower for SRX8T RTR 601396 Serpent  [SER601396]

Serpent SER601396 Shocktower rr SRX8T RTR
Price:
AUD$0.00
Brand:
Serpent
Model:
SER601396
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Product Summary for SRX8T Rear Tower

This replacement tower is intended as the rear mounting unit for the Serpent SRX8T RTR platform and is aimed at scale truggy applications. The copy concentrates on compatibility, proper fitting steps, and the influence of the part on rear suspension geometry without adding unverified specs beyond the model reference.

Compatibility is restricted to the SRX8T RTR name shown in the title. Check that the mounting holes and upper-link clearances on your chassis align with the SRX8T shock layout before proceeding. Do not retrofit this tower to unrelated chassis unless the mounting pattern is an exact match.

Installation guidance: remove the rear shocks and body mounts first, support the chassis to preserve geometry while hardware is removed, and then secure the new tower using the torque figures provided for SRX8T maintenance. Following installation, confirm shock mounting heights, preload, and arm angles to ensure handling consistency.

Adjustment function: the shocktower sets shock mounting choices and upper geometry, with direct effects on roll center and camber recovery that influence rear traction. Apply changes progressively and record them to evaluate performance on track.

Is the Serpent 601396 compatible with other Serpent models?

This part is specified for the SRX8T RTR mounting pattern. Compatibility with other models depends on identical hole spacing and clearances; verify dimensions before attempting a cross-model fit.

How robust is the replacement tower under racing conditions?

Durability depends on driving style and impact severity. Inspect the tower and surrounding mounting points after heavy use and replace any fasteners or washers that show deformation to maintain secure attachment.

Will I need to change my shock preload after fitting this tower?

After fitting, confirm preload and resting ride height; small adjustments to preload or spring rates may be required to restore the original balance, depending on how the new mounting positions compare to the previous setup.

Are any modifications required to the chassis when swapping towers?

No chassis modifications should be necessary if the replacement matches the SRX8T RTR mounting pattern. Only proceed if hole alignment and clearances match exactly; otherwise do not force the component into place.

Copyright © 2008-2026 rcjaz.com.au All rights reserved