SAK-CM103/GA Graphite Main Chassis Compatible with Cero M 210mm by 3Racing  [SAK-CM103/GA]

Rigid graphite centre section for Cero M 210mm

This graphite main chassis panel is an RC-scale replacement designed for the Cero M 210mm wheelbase. The SAK-CM103/GA core is machined from graphite to provide a firmer central platform, which helps even out flex characteristics when carrying out setup and tuning.

Fit this chassis to shift your baseline handling: a stiffer plate commonly reduces mid-corner flex and alters how the car transfers weight, which can be useful when you are fine-tuning suspension geometry, damper rates or roll centre settings. The component is intended to improve setup consistency rather than act as a standalone performance upgrade.

Installation advice: remove the existing chassis panel, ensure the screw holes align with the Cero M 210mm layout, and use the original fasteners. Tighten screws progressively and check that servo, ESC and motor assemblies have sufficient clearance before test runs. Inspect for any sharp edges that might rub wiring or affect ball bearing access and re-check drivetrain alignment after fitting.

As a direct-fit option for Cero M 210mm layouts, this graphite main chassis provides a consistent platform useful for setup work and component placement on 1/10 on-road models.