Sanwa MT-S-4728 Compact 4CH Transmitter Kit [SW-MT-S-4728]

Sanwa MT-S - 4CH 2.4G with RX-472+482 Receiver, FH4/FH3 SSR SSL 4cell

Price:

AUD$348.55

Brand:

Sanwa

Model:

SW-MT-S-4728

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

R/C Models - System - Transmitter - Car Transmitters

Responsive Driving with Sanwa MT-S-4728

The Sanwa MT-S-4728 is a compact 4-channel transmitter kit aimed at drivers who want dependable, low-latency control. It includes both RX-472 and RX-482 receivers and supports FH4 and FH3 protocols including SSR and SSL where applicable.

Receiver Performance Overview

Specifications

RX-472 Receiver:
Nominal Input Voltage: 3.7v to 7.4v
Weight: 0.23oz (6.6g)
Dimensions: 1.18 x 0.91 x 0.55in (30.0 x 23.3 x 14.0mm)
Frequency: 2.4GHz FH3/FH4T Selectable Via Transmitter
Fail Safe Support: Yes (All Channels)
Battery Voltage Fail Safe Limit: 3.5 to 5.0v (FH3) / 3.5 to 7.4v (FH4T)

RX-482 Receiver:
Frequency: 2.4GHz FH4T Selectable Via Transmitter
Nominal Input Voltage: 4.8 to 7.4 Volts (4-6C NiCD/MH, 2S LiFe or 2S LiPo)
Weight: 0.25oz (7.1g)
Dimensions: 0.71 x 0.96 x 1.06in (18.2 x 24.4 x 27.1mm)
Battery Fail Safe Limit: 3.5 to 7.4 Volts (FH4T)

A practical choice for club racing and practice sessions, the Sanwa MT-S-4728 balances compact receivers with flexible protocol options for clean radio performance.

Do I need a special battery for the RX-472?

RX-472 accepts 3.7v to 7.4v input. Use a compatible battery pack within that range and ensure your fail safe voltage settings match your pack to prevent issues during a run.

Is FH4T required for both receivers?

RX-482 uses FH4T while RX-472 can switch between FH3 and FH4T via the transmitter, so configure each receiver to the appropriate mode when binding.

What are the mounting considerations for these receivers?

Both receivers are lightweight; place them away from motor and ESC noise sources, use double-sided foam to secure, and keep antennas positioned for clear reception.

Can I use different battery chemistries with RX-482?

Yes, RX-482 accepts 4.8 to 7.4 Volts including 4-6C NiCD/NiMH or 2S LiFe/2S LiPo packs as listed, just verify your pack voltage stays within the fail safe thresholds.

Hot Brands