Sanwa RX471W 4-Channel FH4 Sealed Receiver  [SW-RX471W]

Sanwa RX471W 4Channel 2.4GHz FH4 Waterproof Receiver
Price:
AUD$120.96
Brand:
Sanwa
Model:
SW-RX471W
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Compact Sanwa RX471W 4-Channel Waterproof Unit

The Sanwa RX471W provides dependable 4-channel reception using FH4 technology for tight throttle and steering response. It is a good fit for hobbyists who run on mixed surfaces and expect consistent radio performance in damp conditions.

Sealed Receiver for Wet Use

Designed with a waterproof enclosure, the RX471W keeps moisture away from sensitive circuits so you can continue driving after light rain or through shallow puddles.

Flexible Protocol Support and Safety

Supporting both FH3 and FH4 modes, the receiver pairs with many Sanwa transmitters and includes fail-safe to protect your model if the signal drops unexpectedly.

Specifications

  • Channels: 4
  • Frequency: 2.4GHz FH3/FH4 Selectable
  • Nominal Input Voltage: 3.7-7.4V
  • Battery Voltage Fail-Safe Limit: 3.5-5.0V (FH3) / 3.5-7.4V (FH4)
  • Dimensions: 32.2mm x 26mm x 16mm
  • Weight: 10.1g

For builders seeking a small, sealed receiver with FH4 compatibility and reliable fail-safe behaviour, the Sanwa RX471W is a solid component choice.

The RX471W is built to resist splashes and light water exposure, but prolonged deep submersion is not recommended even with the sealed case.
Yes, fail-safe values are typically configured via your transmitter so channels return to chosen throttle or steering positions when signal is lost.
No, at roughly 10.1g the RX471W is very light and has minimal impact on handling or balance in 1/10 scale vehicles.
Yes. Route the antenna for clear line of sight when possible, avoid crimping or sharp bends, and keep it away from power wires to minimise interference.

Copyright © 2008-2025 rcjaz.com.au All rights reserved