Sanwa-Compatible MX-6 3-Channel Radio Bundle for 1/10 RC SW-MX6-Combo by Jazrider  [SW-MX6-Combo]

Jazrider Sanwa MX-6 3-Channel 2.4GHz Transmitter with RX-391W, Servo, Battery & Charger Beginner Combo Set for 1/10 RC Car
Price:
AUD$158.81
Brand:
JAZRIDER
Model:
SW-MX6-Combo
Condition:
Brand New
Available in shop
Write a review

Ready-to-run 3-channel radio bundle for 1/10 models

This bundle combines a Sanwa-style MX-6 2.4GHz transmitter system with the RX-391W receiver and the main peripherals needed to operate a 1/10 electric car. It suits drivers looking for a compact starter set that includes transmitter, receiver, steering servo, battery and charger.

The transmitter and RX-391W support steering, throttle and an auxiliary channel for functions such as lighting. The analogue high-torque steering servo is intended for standard 1/10 steering tasks, while the 5000mAh Ni-MH battery provides dependable power for electronics and bench testing.

Set steering and throttle travel using transmitter trims and endpoints, secure the RX-391W in a ventilated radio bay, and fasten the servo with recommended screws and linkage hardware. Charge the Ni-MH pack with the supplied charger and follow normal Ni-MH safety guidance.

Box contents

  • Sanwa MX-6 3-Channel 2.4GHz transmitter with RX-391W receiver - 1 pcs
  • Jazrider TWSV4140 high-torque standard analog servo - 1 pcs
  • Jazrider 5000mAh Ni-MH battery - 1 pcs
  • Jazrider battery charger - 1 pcs

Package specifications

  • Item: Transmitter combo set
  • Model Number: SW-MX6-Combo
  • Compatibility: 1/10 RC car
  • Channels: 3
  • Frequency: 2.4GHz
  • Receiver: RX-391W
  • Servo: Jazrider TWSV4140 high-torque analog servo
  • Battery: 5000mAh Ni-MH
  • Charger: Jazrider battery charger included

The set is a straightforward, serviceable radio package for everyday 1/10 electric car use, offering simple tuning and reliable basic components.

What tuning steps should I take after binding?

After binding, centre the steering with trim adjustments, set throttle endpoints to prevent over-revving, and test failsafe behaviour before running on track.

Can the included servo be upgraded for faster response?

Yes, swapping the analogue servo for a higher-speed digital unit with metal gears will improve response and durability for competitive driving setups.

Is the third channel programmable for lights or winch control?

The auxiliary channel can be configured for accessories such as lights; refer to the transmitter manual to assign output function and adjust travel.

How do I maintain battery life for the Ni-MH pack?

Store the Ni-MH pack charged to recommended levels, avoid deep discharge, and use the supplied charger with the correct charge rate to prolong cell life.

Copyright © 2008-2026 rcjaz.com.au All rights reserved