Savox SH-0255MG Micro Metal Gear Servo - Low Profile Aluminium Case  [SH-0255MG]

Savox SH-0255MG Micro Metal Gear Digital Servo
Price:
AUD$53.18
Brand:
Savox
Model:
SH-0255MG
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Savox SH-0255MG Micro Metal Gear Digital Servo" title="Savox SH-0255MG Micro Metal Gear Digital Servo"

Savox SH-0255MG micro servo for compact installations

The Savox SH-0255MG Micro Metal Gear Digital Servo is designed to fit tight linkages while delivering the precision required by park flyers and 450 class helicopters. Its aluminium housing improves thermal performance and the metal gears resist wear from frequent manoeuvres.

Engineered for precise, repeatable operation

With carefully inspected plastic components and strict quality control, the SH-0255MG is built to maintain accurate control throws over many hours of flying. Production methods also aim to be resource conscious.

Specifications

  • Size: 22.8x12.0x29.4 mm
  • Weight: 15.8 g
  • Speed: 0.16 sec/60° @ 4.8V, 0.13 sec/60° @ 6.0V
  • Torque: 43.1 oz-in @ 4.8V, 54.2 oz-in @ 6.0V
  • Gears: Metal
  • Bearings: Single Ball Bearing
  • Case: Aluminum
  • No-load Current: 180 mA @ 4.8V, 240 mA @ 6.0V
  • Locked Current: 1200 mA @ 4.8V, 1400 mA @ 6.0V
  • Stopped Current: 5 mA @ 4.8V/6.0V
  • Angle Limit: 220° ± 10°
  • Wire Gauge: #26 AWG
  • Lead Length: 250 ± 5 mm
  • Horn Spline: 21T
  • Control Method: PWM
  • Driver Type: Digital Controller
  • Operating Travel: 90° (1000 to 2000 usec)
  • Neutral Position: 1500 usec
  • Dead Band: 5 usec
  • Rotation: Clockwise (1500 to 2000 usec)
  • Pulse Width: 750 to 2250 usec
  • Max Travel: Approx. 145° (750 to 2250 usec)

The Savox SH-0255MG brings metal gear durability and a slim aluminium shell to small to mid size aircraft where precise control is required.

Is the SH-0255MG suited to fast cyclic use?

Yes. The metal gears and digital control make it suitable for cyclic control on 450 class machines when installed correctly and used within its torque limits.

How many ball bearings are fitted?

This servo uses a single ball bearing for the output shaft to reduce friction and maintain consistent rotation feel.

Can I use it for tail or cyclic on electrics?

It is commonly used for cyclic and small control surfaces; for tail use confirm the torque and speed match your setup requirements before swapping.

Copyright © 2008-2026 rcjaz.com.au All rights reserved