Savox SH-0350 Micro Digital Servo - Compact Aluminum Body  [SH-0350]

Savox SH-0350 Micro Digital Servo
Price:
AUD$30.63
Brand:
Savox
Model:
SH-0350
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Savox SH-0350 Micro Digital Servo" title="Savox SH-0350 Micro Digital Servo"

Small Form Savox SH-0350 Servo for Tight Control

The Savox SH-0350 Micro Digital Servo combines compact sizing with precise digital control. The aluminium enclosure reduces heat build up while keeping the unit durable for hobby flying and light aerobatics.

Over-spec design for steady results

The SH-0350 uses an over-specified architecture to outperform typical micro servos. Its industrial plastic gearing and single ball bearing give consistent movement and low backlash. It suits 250/450 helicopters and park flyer aircraft across normal operating voltages.

Specifications

  • Dimensions: 22.8x12.0x25.4 mm
  • Weight: 12.3 g
  • Speed (@4.8V): 0.21 sec/60°
  • Torque (@4.8V): 30.6 oz-in
  • Speed (@6.0V): 0.16 sec/60°
  • Torque (@6.0V): 36.1 oz-in
  • Gear Material: Industrial Plastic
  • Bearing: 1BB
  • Case Material: Aluminum
  • Running Current (No Load @4.8V): 150 mA
  • Running Current (No Load @6.0V): 180 mA
  • Stall Current (Locked @4.8V): 1000 mA
  • Stall Current (Locked @6.0V): 1200 mA
  • Idle Current: 5 mA
  • Limit Angle: 220° ± 10°
  • Connector Wire Gauge: #26 AWG
  • Connector Wire Length: 250 ± 5 mm
  • Horn Gear Spline: 21T
  • Control System: Pulse Width Modification
  • Amplifier Type: Digital Controller
  • Operating Travel: 44° (1500→2000 usec)
  • Neutral Position: 1500 usec
  • Dead Band Width: 5 usec
  • Rotating Direction: Clockwise (1500→2000 usec)
  • Pulse Width Range: 700→2300 usec
  • Maximum Travel: Approx 150° (700→2300 usec)

The Savox SH-0350 Micro Digital Servo is a sensible pick for modellers who need compact, controllable servo action in small helicopters and park flyers.

Yes, the SH-0350 uses pulse width modulation control and works with the typical receivers and flight controllers used in small helis and park flyers.
A single ball bearing supports the output shaft to reduce friction and improve smoothness under normal loads. It helps provide consistent centring and repeatability.
Set servo to 1500 usec on a servo tester or transmitter, then adjust trims and endpoints so control surfaces sit square at neutral and stop before binding occurs.

Copyright © 2008-2026 rcjaz.com.au All rights reserved