Schumacher FT9 Front Lower Arm - Service Replacement Factory Pro O-SCP039F  [FP-O-SCP039F]

Price:
AUD$15.89
Brand:
Factory Pro
Model:
FP-O-SCP039F
Condition:
Brand New
Write a review

Front lower arm description

This Factory Pro aftermarket lower suspension arm is supplied as 1pc and made to fit the Schumacher FT9 touring chassis. It functions as a direct-fit front lower arm for routine service and setup adjustments on FT9 cars.

Purpose: exchange a damaged or worn stock front lower arm, inspect ball stud and pivot pin locations for correct fit during install, and re-establish alignment and roll centre after swapping. The component is for RC model use only.

Workshop notes: remove the front wheel and hub to reach the lower arm mounts, inspect pivot hardware and bushings before refitting, position the new arm with the original orientation and torque fasteners to your chassis guidance. Validate steering geometry and suspension travel on a stand prior to track use.

Compatibility details

Compatible chassis: Schumacher FT9.

Does this replace the OE lower arm?

Yes, it is an aftermarket replacement designed to fit in place of the original front lower arm on the FT9.

Should I check bushings during install?

Inspect and replace worn bushings or bearings to ensure proper suspension action and secure fitment of the new arm.

Is specialised hardware required?

No specialised hardware is needed beyond standard chassis fasteners; use your existing suspension hardware unless damaged.

Copyright © 2008-2026 rcjaz.com.au All rights reserved