Schumacher FT9 Right Rear Graphite Steering Hub - Factory Pro O-SCP038R  [FP-O-SCP038R]

Price:
AUD$12.59
Brand:
Factory Pro
Model:
FP-O-SCP038R
Condition:
Brand New
Write a review

Graphite RR hub plate for the FT9

This Factory Pro O-SCP038R steering hub plate is an aftermarket replacement produced for the Schumacher FT9 chassis, intended for the rear-right steering or suspension upright location. Made from graphite as shown in the product name, it is designed to fit the FT9 steering assembly without changing the chassis geometry.

Fit and installation notes: ensure the hub aligns with the FT9 upright and bearing bores prior to final tightening, reuse original hardware where possible, and verify wheel toe and steering travel once installed. The part is supplied as 1 pcs and meant to replace the stock right rear steering hub plate on the FT9 platform.

Tuning role: a graphite hub plate alters local stiffness compared to plastic components, which can influence rear steering precision and the way the car communicates grip. Fit this part when testing minor adjustments to rear steering rigidity or when replacing a damaged stock plate on the FT9.

Is this an OEM Schumacher part?

No, this is an aftermarket component produced by Factory Pro for use on the Schumacher FT9. It is not an OEM part from Schumacher.

Will graphite affect durability?

Graphite offers a balance of stiffness and wear characteristics; it can be more rigid than plastic but still performs well under normal RC use. Inspect for damage after heavy impacts.

Any quick setup tips for the FT9?

Mount the hub loosely, check bearing alignment and toe settings, then tighten progressively while rechecking steering travel to avoid binding.

Copyright © 2008-2026 rcjaz.com.au All rights reserved