Schumacher Mi10 Graphite 3.0 Front Bulkhead Upgrade for Mi10 - O-SCP045 by Factory Pro  [FP-O-SCP045]

Stiffness-focused front plate for the Mi10

This aftermarket Graphite 3.0 front bulkhead from Factory Pro is designed for the Schumacher Mi10 touring platform and is supplied as a matching pair. It is intended to firm the front section of the chassis to enhance steering precision for tuning-minded racers.

Mounted at the front bulkhead, the plate reduces flex at shock mounts and steering pickup points, producing a steadier steering feel during cornering while retaining original suspension geometry. Racers will notice crisper turn-in and improved mid-corner stability without relocating factory mounting positions.

Fitting requires basic Mi10 teardown: remove the stock front bulkhead, transfer bearings and inserts, install the graphite plate and replace the original fasteners. Check steering range and clearance after fitting and adjust front damping or toe progressively to dial in the new handling balance. This is an aftermarket tuning accessory intended for track use or practice sessions.