SCHUMACHER Mi9 Graphite 4.0 Rear Shock Tower Hard Profile - O-SCP032 by Factory Pro  [FP-O-SCP032]

Mi9 rear shock mount in hard graphite

This aftermarket rear shock tower fits the SCHUMACHER Mi9 platform and is supplied by Factory Pro under model O-SCP032. It is a hard-profile rear tower made from graphite 4.0 and comes with an integrated body post mount to retain stock body post positioning for Mi9 bodies. The description focuses on compatibility, installation notes and suspension tuning effects rather than making performance promises.

Purpose and fit

Intended for SCHUMACHER Mi9 chassis only. As an RC hop-up it stiffens the rear strut area compared with softer stock towers, which changes the chassis response and tuning window. Choose this tower when you need a firmer rear reference to adjust roll stiffness, anti-squat balance or rebound behaviour for sealed or carpet venues.

Installation and practical notes

• Confirm existing mounting points on your Mi9 chassis prior to fitting and ensure screw lengths and washer placement match the factory tower fastenings.
• Install the integrated body post mount to preserve body alignment; check for adequate body clearance and correct ride height before extended running.
• After installing a harder tower, review spring rates and damper settings to rebalance rear compliance and prevent drivetrain overload.

Material and inspection

The part is listed as graphite 4.0 construction and should be regarded as a composite RC component. Inspect mounting holes and mating faces for burrs or fit issues before final assembly and re-check fastener torque after an initial break-in run.