Schumacher Neon 210mm Wheelbase Upgrade Kit - Factory Pro O-SMCK01  [FP-O-SMCK01]

Price:
AUD$87.59
Brand:
Factory Pro
Model:
FP-O-SMCK01
Condition:
Brand New
Write a review

Neon chassis 210mm wheelbase upgrade

The graphite upgrade kit converts a Schumacher Neon chassis to a 210mm wheelbase and is aimed at drivers refining on-track setup. It focuses on practical layout changes to influence handling and chassis dynamics rather than cosmetic alterations.

Altering wheelbase affects weight distribution and corner entry behaviour, so you should plan to revise suspension geometry and alignment. Repositioning shocks, adjusting roll centre and tuning toe and ride height will be needed to restore the desired handling balance. The components are made for direct installation on Schumacher Neon models where a 210mm configuration is required for particular track conditions.

Specifications

  • Item: Wheelbase 210mm Conversion Kit
  • Material: Graphite
  • Model Number: O-SMCK01
  • Compatibility: Schumacher Neon

Choose this upgrade when a reliable 210mm wheelbase is part of your tuning strategy for Schumacher Neon; follow with suspension and alignment adjustments to achieve targeted handling.

Which track types benefit from a 210mm wheelbase?

Shorter or longer wheelbases can suit different circuits; a 210mm layout often helps with tighter, technical tracks by altering turn-in and mid-corner balance. Test on your local layout to confirm gains.

Can I combine this with other chassis upgrades?

Yes, pairing the wheelbase change with roll centre blocks, different shock pistons and revised sway bar settings will let you tune the car more precisely for your setup goals.

How long does the swap typically take?

Allow an hour for a careful swap if you have standard tools, plus extra time for setup and test laps to fine tune geometry and ride height.

Will gear mesh or drivetrain need changes?

Wheelbase tweaks can affect driveshaft angles and gear engagement. Inspect gear mesh and drivetrain alignment after installation and adjust mountings if needed.

Is the kit compatible with stock mounting hardware?

Most installations use existing fasteners, but check the product listing for any extra hardware required. Carry spare screws and threadlocker for a reliable fit.

Copyright © 2008-2026 rcjaz.com.au All rights reserved