SCX10 48P 85T Aftermarket Spur Gear SSCX1585T by GPM  [SSCX1585T]

Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 85T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1585T
Price:
AUD$29.39
Brand:
GPM
Model:
SSCX1585T
GTIN:
4894538166118
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

85T 48-pitch spur kit for SCX10 and Wraith

This is an aftermarket spur gear assembly intended for Axial SCX10 and Wraith platforms, combining a robust #45 steel 85T 48-pitch spur with an aluminium adapter for hub mounting. The set suits builders replacing worn spurs or upgrading for greater wear life and dependable mesh.

Installation tips: verify 48-pitch compatibility with your existing pinion, inspect mesh with the transmission held steady, and fasten the adapter and spur according to your chassis hub method. This is an RC accessory part and not for use on full-size vehicles.

Specifications

  • Item Spur gear set
  • Material Steel #45 spur, aluminium adapter
  • Model Number SSCX1585T
  • Compatibility For SCX10, Wraith
  • Teeth 85T
  • Pitch 48 pitch

Fit this set when you need a reliable replacement for 48-pitch spurs or when tuning ratios on SCX10-based crawlers to improve tooth wear and mesh stability.

Use a 48-pitch pinion with this spur to ensure correct tooth engagement; different pitches will not mesh properly.
The aluminium adapter provides accurate alignment and lightweight strength, while the steel spur resists tooth wear under normal crawling loads.
Shimming is rarely needed if your hub and adapter are aligned; set mesh first and only add shims if you see lateral play or rubbing.
Regularly inspect tooth faces for pitting, confirm adapter bolts are secure, and recheck mesh after any heavy impacts.

Copyright © 2008-2026 rcjaz.com.au All rights reserved