Serpent 110475 4x8x0.3 Spacer Shim for Accurate RC Setup  [SER110475]

Spacer shim for setup and tuning

The Serpent SER110475 shim is marked 4x8x0.3 and is designed as a thin spacing washer for RC components. It helps make subtle positional adjustments where small gaps influence drivetrain function, linkage geometry, or suspension alignment.

These shims are commonly applied to remove lateral slop, set precise endplay on shafts, and achieve repeatable stack heights during gearbox or steering assembly. Verify that the 4x8x0.3 size matches the target location on your chassis before committing to fitment.

To fit, slide the shim into the gap and check movement after each adjustment to prevent binding. Thin washers can be combined to reach desired thickness, but always check for correct preload and free rotation once stacked.

Store shims flat and keep sizes separated to avoid mixing during maintenance. For vehicle-specific fit, refer to the model's parts diagram or official parts list rather than guessing based on appearance.