Serpent 4X Tuning Stiffener Magnesium Plate - Arrowmax AM-900007  [AM-900007]

Arrowmax AM-900007 Serpent 4X Chssis Arrowspace Mg Stiff
Price:
AUD$176.16
Brand:
Arrowmax
Model:
AM-900007
Condition:
Brand New
Write a review

Performance stiffener for Serpent 4X chassis

The Arrowmax AM-900007 is a magnesium chassis stiffener made for the Serpent 4X platform and Project 4X variants. Using an Arrowspace magnesium construction, the plate adds focused torsional rigidity to influence chassis balance and handling during tuning sessions.

As a bolt-on hop-up, the stiffener is built to match Project 4X chassis attachment points so it does not alter the original layout. Its purpose is to provide repeatable changes in flex distribution so mechanics can fine-tune suspension and roll behaviour without replacing major components.

Installation notes: fit the plate to existing chassis mounts and decide if it will replace or work alongside stock braces depending on your setup goals. Verify alignment with factory holes and check for interference with drivetrain or suspension components prior to final tightening.

Specifications

  • Item: Chassis stiffener plate
  • Material: Magnesium alloy
  • Model Number: AM-900007
  • Compatibility: Serpent 4X, Project 4X Series

For tuners seeking a controlled change in chassis stiffness, this magnesium plate offers a simple, reliable upgrade path for Serpent 4X models.

How will this plate change handling on bumpy tracks?

Increasing local stiffness can reduce unwanted flex, improving consistency over uneven surfaces, though you may need to soften suspension to retain grip.

Can it be used with stock braces?

Yes, the plate can supplement factory braces or replace them depending on your tuning strategy; test both arrangements to find the best result.

Is any trimming required for fitment?

No trimming should be necessary when the plate is matched to a standard Project 4X chassis, but always verify hole alignment and clearances before final assembly.

Will weight increase be significant?

Magnesium is chosen for low mass relative to stiffness, so weight added is modest compared with steel alternatives, keeping the balance close to stock.

Any maintenance or care needed?

Inspect fasteners regularly for tightness and look for any signs of wear around mounting points after heavy use to maintain predictable performance.

Copyright © 2008-2026 rcjaz.com.au All rights reserved