Serpent Medius X26 Chassis Upgrade Graphite 2.25 O-SPP001 - Factory Pro  [FP-O-SPP001]

Price:
AUD$65.03
Brand:
Factory Pro
Model:
FP-O-SPP001
Condition:
Brand New
Write a review

Medius X26 graphite centre chassis

This Factory Pro main chassis is intended for Serpent Medius X26 1/10 touring cars and comes as a graphite 2.25mm main plate. It serves as an aftermarket replacement to adjust chassis rigidity and change handling balance for both practice and competition driving.

The plate is designed for direct replacement on Medius X26 mounting layouts. Before you fit it, check that standoffs and electronic placements match the new plate profile so ESC, servo, and motor clearances remain unobstructed. The material and thickness adjustment aims to modify flex so drivers can tune understeer or oversteer tendencies without changing suspension geometry.

After fitting, confirm fastener torque and visually inspect for edge wear or delamination. Graphite offers increased stiffness versus composite plates, and minor spring or anti-roll bar changes may be required to restore the handling character you want.

Specifications

  • Item: Main chassis
  • Material: Graphite 2.25
  • Model Number: O-SPP001
  • Compatibility: Serpent Medius X26

Compatibility

  • Serpent Medius X26

Deploy this chassis plate to deliberately alter the central stiffness of a Medius X26, then tune suspension components in small steps to evaluate lap time impact.

What handling changes should I expect after installing the plate?

Expect a firmer, more direct response from the chassis. This often reduces flex-induced understeer and tightens turn-in. Follow up with small sway bar and spring tweaks to dial balance.

How should I approach suspension settings after the swap?

Start with softer roll control and incremental increases to spring rates or anti-roll bar stiffness until the car achieves the desired neutral balance. Log each change to track effects.

Will lap times generally improve with a stiffer chassis?

A stiffer chassis can yield more consistent lap times on smooth surfaces by improving predictability, but benefits depend on track conditions and companion setup changes. Test in controlled increments.

Do I need to relocate electronics after fitting?

Most positions remain usable, however the thicker plate may change stacking height. Verify clearances for the motor, ESC and servo and adjust mounts if necessary.

Is this plate suited for both club and national level events?

Yes, it is suitable across levels; use it to fine tune chassis stiffness to the event surface and then refine suspension settings for competitiveness.

Does the product come with fitting instructions?

The listing covers the main plate only; basic fitting knowledge for Medius X26 is assumed. If unsure, refer to your car manual or seek guidance from experienced builders.

Copyright © 2008-2026 rcjaz.com.au All rights reserved