Serpent SER110468 5x6.5x2 Shim Set - Fine Tune Spacers  [SER110468]

Serpent SER110468 Shim 5x6.5x2
Price:
AUD$22.96
Brand:
Serpent
Model:
SER110468
Condition:
Brand New
Write a review

Fine Tune Spacing with Serpent SER110468 5x6.5x2

Hobbyists looking to refine vehicle setup will find the Serpent Shim 5x6.5x2 an easy way to achieve exact spacing. These shims reduce unwanted contact and support longer component life.

Application Notes for Track and Trail

The shim fits into areas where small tolerances matter, such as suspension joints and gear stacks. Using the correct shim thickness helps cut drag and keeps the drivetrain operating efficiently.

Compatibility Tips

Intended for widespread use on 1/10 scale models, this shim is useful when minor clearance tweaks are needed without permanent modifications. Stack as required to reach the correct spacing.

Are these shims metal or plastic?

This listing refers to the 5x6.5x2 shim part; verify material details with the supplier if you need a specific metal or plastic type for your application.

How do I select the right shim combination?

Start with a single shim and measure. If more clearance is needed, add another in small increments until the required tolerance is reached.

Will adding shims affect bearing alignment?

It can. When adjusting spacing near bearings, check for smooth rotation and re-seat bearings if necessary to prevent side loads.

Any maintenance advice after installation?

Inspect shimmed areas during routine service and replace any shims that show deformation or corrosion to keep tolerances consistent.

Copyright © 2008-2026 rcjaz.com.au All rights reserved