Serpent 160330 - L27 Performance Rear Springs 1/8 Scale [SER160330]

Price:

AUD$34.10

Brand:

Serpent

Model:

SER160330

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Serpent - Viper Series - Viper 988 1/8 GP (SER903017)

Race-Grade Rear Springs for Suspension Tuning

If you dial in rear handling, the Serpent 160330 - L27 springs are built for 1/8th scale rear shock mounts and focused on predictable support. They are suited to track use and frequent setup changes.

Tip Paint Identification and Stable Seating

The design drops full coatings in favour of a painted tip to indicate rate, preserving the spring's natural action. Tip colours are used for quick identification, and the ground flat ends help keep the spring aligned during heavy loads.

Rate Breakdown by Colour

Choose from a wide spread of stiffnesses to match vehicle weight and surface conditions:

White: 2.3 N/mm (13 lb/inch)
Yellow: 2.8 N/mm (16 lb/inch)
Orange: 3.4 N/mm (19.5 lb/inch)
Red: 4.1 N/mm (23.5 lb/inch)
Pink: 4.9 N/mm (28 lb/inch)
Blue: 5.8 N/mm (33 lb/inch)
Purple: 6.8 N/mm (39 lb/inch)
Green: 8.0 N/mm (45.5 lb/inch)
Grey: 9.0 N/mm (51.5 lb/inch)
Black: 10.0 N/mm (57 lb/inch)

Can I mix spring rates front to rear?

Mixing rates is common to tune balance. Use slightly softer springs at the front for more turn-in or firmer at the rear to reduce roll, depending on handling goals.

How should I store spare springs?

Store springs flat or on a spool to avoid deformation and keep them labelled by colour so you can swap them quickly between runs.

Do these springs affect damping settings?

Yes, spring rate changes alter suspension frequency, so you may need to adjust shock oil or pistons to retain the desired rebound and compression behaviour.