Serpent 401635 Upgraded Aluminium Suspension Bracket for S411 4.0  [SER401635]

Serpent SER401635 Suspension Bracket Aluminium 0.5 S411 4.0 (2)
Price:
AUD$35.56
Brand:
Serpent
Model:
SER401635
Condition:
Brand New
Write a review

Machined Aluminium Brackets for S411 4.0

Install the Serpent 401635 aluminium suspension brackets on your S411 4.0 to gain firmer mounting points and crisper suspension response. The light yet robust aluminium construction helps reduce unwanted flex under load.

Strength and Handling

Precision CNC machining creates accurate faces and holes that line up with the S411 4.0 chassis, improving repeatability and handling predictability. The added stiffness helps the suspension react more consistently through a set of corners.

Installation Tips and Fit

These brackets are produced to match Serpent S411 4.0 mounting patterns and usually fit with original hardware. Tighten fasteners to recommended torque and recheck alignment after your first run.

Do aluminium brackets need different bushings or bearings?

Most standard bushings and bearings will work, but inspect fit and clearance during installation to avoid binding.

Will these brackets affect suspension tuning?

The stiffer mounting points can change corner entry and mid-corner balance, so retune shocks and anti-roll settings if needed.

What care do aluminium parts require?

Clean debris after each session, check for dents or cracks after impacts, and ensure bolts remain secure. Light corrosion is uncommon on quality aluminium.

Copyright © 2008-2025 rcjaz.com.au All rights reserved