Serpent SER401762 Yellow Shock Springs C=5 for 4X EVO Pair  [SER401762]

Serpent SER401762 Shock Spring Yellow C=5 4X EVO (2)
Price:
AUD$10.92
Brand:
Serpent
Model:
SER401762
Condition:
Brand New
Write a review

Precision Shock Springs for 4X EVO

Drivers seeking consistent suspension behaviour will find the Serpent SER401762 Yellow Shock Springs useful. Engineered for 4X EVO compatibility, the springs help keep chassis balance predictable.

C=5 Spring Characteristics

The C=5 designation produces a neutral spring response that favours stable cornering without overloading the chassis. That makes it easier to tune damping and sway settings around the springs.

Installation Notes

Installing the springs is a simple task for most builders and can be done between runs. Check that preload collars sit evenly and test a few laps to verify handling changes.

Will these fit shocks from other manufacturers?

Compatibility depends on inner diameter and shaft spacing. The springs are cut for 4X EVO dimensions so cross-brand fit is possible only when measurements match.

Should I change oil with these springs?

Spring rate complements shock oil choice. Try pairing C=5 springs with your usual oil, then tweak oil viscosity if you want slower or faster damper response.

How do I check for spring wear?

Look for coil deformation, rust spots, or uneven free length. Replace springs that show permanent set or inconsistent coils to keep handling predictable.

Can these be used front and rear?

Yes, they can be used front and rear as long as you account for ride height and weight distribution when tuning the shocks.

Do I need special tools to fit them?

No special tools required beyond standard shock disassembly equipment. A shock compressor or careful hand assembly is usually enough.

Copyright © 2008-2025 rcjaz.com.au All rights reserved