Serpent SER401967 Rear Stiffener Set for X20 '21 Off-Road Favourite  [SER401967]

Serpent SER401967 Rear stiffner set X20 \'21
Price:
AUD$47.23
Brand:
Serpent
Model:
SER401967
Condition:
Brand New
Write a review

Tighten Up Your Serpent X20 '21 Chassis for Consistent Handling

The Serpent SER401967 Rear Stiffener Set is an effective bolt-on to reduce unwanted flex in the Medius X20 '21 chassis and boost longevity during aggressive driving. It is produced to fit the Medius X20 '21 MID 1/10 EP models so the part aligns with existing mount points.

Performance Gains from a Stiffer Rear

Installing the rear stiffener on a Serpent X20 '21 tightens the rear end, which often translates to crisper steering and steadier exits from corners. The added rigidity helps make setup changes more repeatable when you are tuning for lap time.

Mounting Notes and Model Fit

The rear stiffener set installs with standard fasteners and usually needs no chassis cutting or fabrication. It is specifically matched to the Medius X20 '21 MID 1/10 EP (SER400037) and (SER400038) models for straightforward compatibility.

Will this change tyre wear or balance?

Stiffening the rear can alter load transfer and may slightly affect tyre wear patterns. You may need to tweak camber or toe to restore preferred balance.

Does the stiffener require special screws?

No special fasteners are normally required; the set is designed to use the stock mounting hardware or common replacements found in most toolkits.

Is aftermarket tuning recommended after install?

After fitting the stiffener you may want to review shock valving and anti roll settings to get the handling tuned to your driving style and track surface.

Copyright © 2008-2025 rcjaz.com.au All rights reserved