Serpent 500225 Front Shock Springs 3.0lbs for SRX2 - Off Road Precision  [SER500225]

Serpent SER500225 Shock Spring red 3 0lbs Front (2) SRX2
Price:
AUD$11.33
Brand:
Serpent
Model:
SER500225
Condition:
Brand New
Write a review

Improve Cornering on Your SRX2 with Serpent 500225

Fit the Serpent 500225 Front Shock Springs to sharpen your SRX2's front-end reaction. The red 3.0lbs springs give a firmer feel that helps maintain composure through successive corners and rough patches.

Benefits of the 3.0lbs Springs

These springs offer stable compression characteristics so the chassis stays more planted under braking and turn-in. The consistent rate helps drivers tune damping and roll center for predictable lap times.

Easy Fitment for SRX2 Users

Custom made for the SRX2 shock assembly, the Serpent 500225 springs slide onto stock shafts without extra parts. They are a practical upgrade for racers wanting a cleaner front-end balance.

How do I install Serpent 500225 springs?

Remove the shocks from the car, compress the spring onto the shock shaft, seat the retainer, and reinstall. Check preload and spring alignment before testing.

Will these springs help on bumpy tracks?

They help control mid-corner chassis movement, but on very rough surfaces you may prefer a softer spring or heavier shock oil to retain traction.

Can I mix rates front and rear?

Mixing spring rates is common to tune understeer and oversteer; try 3.0lbs front with a slightly softer rear to encourage rotation, then adjust to taste.

How to maintain these springs?

Keep springs clean and inspect for nicks or corrosion. Replace if they lose rate or show visible wear, and check retainers for secure fitment.

Copyright © 2008-2025 rcjaz.com.au All rights reserved