Serpent Serpent Cobra E-Truggy RTR Blue #SER600039-B  [SER600039-B]

Serpent SER600039-B Serpent Cobra E-Truggy RTR Blue
Price:
AUD$794.05
Brand:
Serpent
Model:
SER600039-B
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - Off-Road - Truggy - Electric Powered category
Write a review
Serpent made 1/8 Cobra E- Blue (SER600039-B) AWD drivetrain Electric Powered Off-Road Truggy RTR (Ready-to-Run)

  • Introduction

    The Serpent Cobra E-Truggy in RTR trim is an ideal basher kind vehicle that will take many beating and its additionally a great package to begin real racing ! Based on the Cobra E-Truggy it's the outright rate, great administration, dependability, rigidness and durability you may need.

    The RTR package is actually dialed:
    - factory come up with racing framework
    - prepainted and precut low kind truggy human body and big composite back wing
    - premounted truggy tyres/wheels/inserts
    - pre-set 4S waterproof 150A speedo ( DragonRC)
    - 2000kv brushless longbody motor (DragonRC)
    - electronic 2.4ghz transmitter (DragonRC)
    - steel gear servo 16kg ( DragonRC-Savox)
    - 3 oilfilled geardifferentials
    - Big bore shocks with plastic dustboots and machined aluminium shocktowers
    - Spring steel transmission elements and turnbuckles, front and rear cvd driveshafts
    - Front and straight back anti-roll pubs
    - big battery-cases with effortless felcron straps
    - Machined aluminium chassisplate
    - completely ballraced
    - Batteries the vehicle and transmitter aren't included

    The bodyshell will come in orange, red, green, blue and red, and a definite sort.

    Serpent provides numerous optional parts due to this vehicle to enhance performance, lighter or even for also nicer appears.

  • Available in 4 colors:
    600039-O Serpent Cobra E-Truggy RTR orange
    600039-R Serpent Cobra E-Truggy RTR red
    600039-B Serpent Cobra E-Truggy RTR blue
    600039-G Serpent Cobra E-Truggy RTR green

  • Main features

    car
    completely expert pre come up with and pre-set framework and electronic devices.

    Transmitter
    DragonRc 2.4 GHz steeringwheel kind transmitter with lots settings and good range. Is sold with small and light receiver.

    Speedo
    DragonRC waterproof speedcontroller with a massive 150A capacity to manage the brushless motor and 4S power packs

    Motor
    DragonRC longbody 2000kV brushless motor with effortless colorcoded connectors

    Body
    Prepainted and pre-cut low e-Truggy human body, in 4 main colors orange, red, Green and Blue. ( additionally clear one available as optional)

    Tyres
    Premounted battle ready tyres / tires with soft substances and pintype profile for incredible hold.

    Chassis
    exceedingly slim 3mm 7075T6 aluminium framework, with machining in the top face to make it lighter in strategic places and to get a handle on flex. Kick-up front for appropriate landings. Angled side to increase cornering approval, and secure and simple mounting side guards with 5 screws. Countersunk holes, pouches to place the suspension brackets. Generally speaking the Truggy is built to keep consitently the fat really main and near the centerline that you can, to create a fantastic general balance.

    Side guards / battery trays
    Durable shaped composite side guards / battery pack trays that stay glued to the type of the chassis, and mount with 5 screws each side. Front and sides adequate to help keep the dust down. The guards/trays create lots of security. The batteries are set up in longtudinal fashion, maintaining the weight suprisingly low in automobile. The battery power trays features user-friendly Serpent marked felcron TM straps to secure the batteries in position. Fits 2S and 3S batteries.

    Motormount:
    The engine is place in many optimal destination inside vehicle, keeping motor-forces and transmission elements / alignment in mind. Just one-screw is required to secure the BL engine, to the nicely produced durable machined aluminium motormount. Area for extra motor-cooling available as needed. The space the motor enables mounting all popular buggy and (monster)truggy engines.

    Composite framework braces
    Allows the framework to flex which assists improve bump management. Front and back.

    Front bumper
    well rounded front bumper, identical to about the Cobra buggy, to shield the best anti-roll club, suspension brackets, and moves inline with kick-up framework front side for safe landings.

    Front suspension system system
    lengthy and durable composite reduced wishbones, in conjunction with top spring-steel trackrods. 2 paid down shock-mount jobs. Downstops can be employed as needed. Pivotball kind anti-roll club rods.
    .
    Front steering / servo saver / angled
    Revolutionary angled front side steering installation to reduce the angle of distinction between your total caster and steering airplane. Therefore you should have less bump steer and a truer steering Ackerman through the complete array of suspension.

    Adjustable springtime packed servo-saver system with interchangeable Ackermann dishes. Along with the design related to steering bell cranks whenever changing the Ackerman you won't should adjust your steering tie rods. You merely will simply need certainly to adjust your end points on your own radio.. a breeze to get into and set-up.

    The Inboard Bell crank keeps the lever and linkage in the automobile. It can help aided by the avoidance of problems for the steering system. Zero scrub radiuses on steering knuckle, assists in easing the jacking effect created by your steering knuckle offset. It provides an even more direct fell while keeping the automobiles framework more level while turning.

    The front roll center are changed quickly by going the steering knuckle shims making use of their appropriate places.

    Topped of with a good composite top-plate.

    Front steering-block / c-hubs
    incredibly durable front side steeringblock / C-hub installation .

    Drive-shafts
    longer and lightweight springtime metal devices with pushed in metal pins, laser-engraved. Same length front side and rear.

    Wheel-axles / wheel-nut
    Serpent springtime steel threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to keep the massive truggy wheels/tyres on course.

    Captured universal bones
    Guarantees you could finish a race without loosing a pin or set screw. All components, axles and drive train components have capture pins

    Front shocktower
    Light, strong and durable machined 5mm aluminium products with 5 jobs for shockangle.

    Shock-set front part and back
    16mm big bore shocks, with difficult anodized accuracy threaded shock-bodies. Shockboots in silicone synthetic to help keep the dust away . Chromed shock-shafts for supersmooth shockaction . The bigger o bands offer less general stress and a greater seal without dragging in the shock shaft.

    Suspension brackets
    The hinge-pins / hingepin balls are captured in durable composite suspension system system brackets . These capture the nylon roll-center inserts.

    Anti-roll club / anti-roll bar linkage with pivotball
    The anti-roll pubs front and back are made of good quality unique springtime steel, and they are captured inside diff-cased in ballbearing for perfect guidance and control.

    Receiver package / servo mount / speedo mount
    Composite one piece radiobox to firmly install servo� s, speedo and receiver. For optimum security the light receiver fits the top-case easy, with a small opening to permit cable to protrude. The speedo seats suprisingly low on a plate just above the framework, for that reason quick cables enables you to the engine. The servo is installed in a vertical fashion.

    Central diff
    Optimised primary gear-diff with 50T super-hard spur-gear . Smaller, compact design to reduce rotating mass towards the maximum.

    Transmission shafts
    Durable but light and slim Serpent springtime metal, laser etched shafts.

    Front and back diff
    Optimised gear-diff with superhard spur-gears . Smaller, compact design to lessen rotating mass towards max. Exact same variation front side and back. Diff coupler in springtime metal seated in large barings for durability.

    back shocktower
    Light, strong and durable machined 5mm aluminum product with 5 functions for shockangle.

    Rear uprights
    Durable composite straight back uprights with 3 camber roles

    Suspension brackets back
    Durable composite devices with eccentric inserts to change set-up.

    back wing mount
    The composite rear wing mount, allows to enhance the angle related to back wing.

    Back wing
    Two phase high down force wing, has two examples of angle, which also includes 2 fins. Helps improve down force and straight line ability

    Bodymounts
    Nylon bodymounts with wider sitting the body, securely fastened on shocktowers.

    Super Low profile e-Truck Body
    Enhances appearance also keeps the profile minimum. Comes precut and prepainted.

    Decals
    Applied to the body.

    Natural oils / oil
    car is come up with with high quality silicone oils the diffs and shocks and black colored oil. Threadlock used in which needed.

    Manual
    Full color manual showing the vehicle, specs, guidelines and exploded views. The transmitter and speedo have little split manuals included.

    Box
    color protective package to re-use for automobile transportation or tyres.





Copyright © 2008-2024 rcjaz.com.au All rights reserved