Serpent Serpent Cobra E-Truggy RTR Green #SER600039-G  [SER600039-G]

Serpent SER600039-G Serpent Cobra E-Truggy RTR Green
Price:
AUD$808.89
Brand:
Serpent
Model:
SER600039-G
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - Off-Road - Truggy - Electric Powered category
Write a review
Serpent made 1/8 Cobra E- Green (SER600039-G) AWD drivetrain Electric Powered Off-Road Truggy RTR (Ready-to-Run)

  • Introduction

    The Serpent Cobra E-Truggy in RTR trim is a perfect basher type car that can simply take plenty of beating and its particular also a good package to begin genuine race ! On the basis of the Cobra E-Truggy it is the outright speed, great handling, dependability, rigidness and durability you need.

    The RTR package is actually dialed:
    -factory assembled rushing chassis
    -prepainted and precut low sort truggy human anatomy and big composite backside wing
    -premounted truggy tyres/wheels/inserts
    -pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
    -2000kv brushless longbody engine (DragonRC)
    -Digital 2.4ghz transmitter (DragonRC)
    -Metal gear servo 16kg ( DragonRC-Savox)
    -3 oilfilled geardifferentials
    -Big bore shocks with rubber dustboots and machined aluminium shocktowers
    -Spring metal transmission components and turnbuckles, front part and back cvd driveshafts
    -Front and back anti-roll bars
    -Large battery-cases with effortless felcron straps
    -Machined aluminium chassisplate
    -Fully ballraced
    -Batteries the automobile and transmitter aren't included

    The bodyshell will come in orange, red, green, blue and red, plus a certain kind.

    Serpent offers a multitude of optional components because of this car to improve performance, lighter and sometimes even for even nicer appearance.

  • Main features

    Car
    Fully expert pre put together and pre-set framework and electronic devices.

    Transmitter
    DragonRc 2.4 GHz steeringwheel kind transmitter with lots settings and good range. Includes tiny and light receiver.

    Speedo
    DragonRC waterproof speedcontroller with an enormous 150A capability to manage the brushless engine and 4S or 6S battery pack power

    Motor
    DragonRC longbody 2000kV brushless motor with simple colorcoded connectors

    Body
    Prepainted and pre-cut low e-Truggy human body, in 4 main colors orange, red, Green and Blue. ( additionally clear one available as optional)

    Tyres
    Premounted battle ready tyres / wheels with soft substances and pintype profile for amazing grip.

    Chassis
    Very narrow 3mm 7075T6 aluminium framework, with machining on top face which makes it lighter in strategic areas and to get a handle on flex. Kick-up front side for appropriate landings. Angled part to boost cornering approval, and protected and easy mounting side guards with 5 screws. Countersunk holes, pouches to position the suspension system brackets. Overall the Truggy is made to keep the extra weight exceedingly main and close to the centerline as possible, generate an excellent basic stability.

    Side guards / battery trays
    Durable shaped composite part guards / battery power trays that follow the distinct the framework, and mount with 5 screws each part. Front and sides high enough to help keep the dirt out. The guards/trays create many security. The batteries are installed in longtudinal fashion, keeping the extra fat really low in car. The battery pack trays features easy to use Serpent noticeable felcron TM straps to secure the batteries setup. Fits 2S and 3S batteries.

    Motormount:
    The motor is put within the many optimal place inside automobile, keeping motor-forces and transmission parts / placement in your thoughts. Only one-screw is required to secure the BL motor, to the nicely designed durable machined aluminium motormount. Area for extra motor-cooling available as required. The area for the engine allows mounting all popular buggy and (monster)truggy motors.

    Composite framework braces
    Allows the framework to flex which assists improve bump maneuvering. Front and rear.

    Front bumper
    Nicely curved front side bumper, identical to on the Cobra buggy, to guard leading anti-roll club, suspension brackets, and moves inline with kick-up chassis front for safe landings.

    front side suspension
    Very long and durable composite reduced wishbones, coupled with top spring-steel trackrods. 2 reduced shock-mount jobs. Downstops may be used as needed. Pivotball type anti-roll club rods.
    .
    Front steering / servo saver / angled
    Innovative angled front side steering construction to cut back the angle of distinction between the full total caster and steering airplane. For that reason you will have less bump steer and a truer steering Ackerman through the complete array of suspension.

    Adjustable springtime packed servo-saver system with interchangeable Ackermann dishes. Utilizing the design for the steering bell cranks whenever changing the Ackerman you will not need certainly to adjust your steering tie rods. You merely will simply must adjust your end points in your radio.. super easy to gain access to and set-up.

    The Inboard Bell crank keeps the lever and linkage into the vehicle. It'll help out with preventing damage to the steering system. Zero scrub radiuses on steering knuckle, assists in easing the jacking impact created by your steering knuckle offset. It offers a far more direct dropped while maintaining the vehicles chassis more degree while turning.

    The front roll center is changed quickly by moving the steering knuckle shims for their appropriate locations.

    Topped of with a great composite top-plate.

    Front steering-block / c-hubs
    Very durable front side steeringblock / C-hub setup .

    Drive-shafts
    very long and lightweight springtime steel devices with pressed in metal pins, laser-engraved. Same size front and rear.

    Wheel-axles / wheel-nut
    Serpent springtime steel threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to help keep the massive truggy wheels/tyres on course.

    Captured universal joints
    Guarantees you will finish a race without loosing a pin or set screw. All elements, axles and drive train elements have actually really capture pins

    Front shocktower
    Light, strong and durable machined 5mm aluminium units with 5 jobs for shockangle.

    Shock-set front side and rear
    16mm big bore shocks, with hard anodized accuracy threaded shock-bodies. Shockboots in silicone synthetic to keep the dirt away . Chromed shock-shafts for supersmooth shockaction . The bigger o bands offer less general force and a greater seal without dragging regarding the surprise shaft.

    Suspension brackets
    The hinge-pins / hingepin balls are captured in durable composite suspension system brackets . These capture the nylon roll-center inserts.

    Anti-roll club / anti-roll club linkage with pivotball
    The anti-roll pubs front and right back are constructed with high quality unique springtime steel, and so are captured on diff-cased in ballbearing for perfect guidance and control.

    Receiver package / servo mount / speedo mount
    Composite one piece radiobox to securely install servo� s, speedo and receiver. For optimum security the light receiver fits the top-case easy, with a tiny opening permitting cable to protrude. The speedo seats low on a plate right above the framework, therefore brief cables enables you to the motor. The servo is installed in a vertical fashion.

    Central diff
    Optimised primary gear-diff with 50T super-hard spur-gear . Really small, compact design to lessen rotating mass toward max.

    Transmission shafts
    Durable but light and slim Serpent springtime steel, laser etched shafts.

    Front and back diff
    Optimised gear-diff with superhard spur-gears . Small, compact design to reduce rotating mass towards maximum. Identical variation front part and rear. Diff coupler in spring steel seated in big barings for durability.

    Rear shocktower
    Light, strong and durable machined 5mm aluminum product with 5 roles for shockangle.

    Rear uprights
    Durable composite rear uprights with 3 camber positions

    Suspension brackets rear
    Durable composite units with eccentric inserts to alter set-up.

    Rear wing mount
    The composite back wing mount, allows to enhance the angle of straight back wing.

    Rear wing
    Two phase high down force wing, has two levels of angle, that also includes 2 fins. Helps improve down force and right line capability

    Bodymounts
    Nylon bodymounts with wider sitting the human anatomy, securely fastened towards the shocktowers.

    Super Minimal profile e-Truck Body
    Improves appearance along with keeps the profile minimum. Comes precut and prepainted.

    Decals
    Applied towards human body.

    Oils / grease
    Car is come up with with a top quality silicone oils the diffs and shocks and black oil. Threadlock used in which needed.

    Manual
    Full color manual showing the automobile, specs, recommendations and exploded views. The transmitter and speedo have in fact small split manuals included.

    Box
    Full color protective field to re-use for car transport or tyres.

Copyright © 2008-2024 rcjaz.com.au All rights reserved