Serpent Serpent Cobra E-Truggy RTR red #SER600039-R  [SER600039-R]

Serpent SER600039-R Serpent Cobra E-Truggy RTR red
Price:
AUD$810.50
Brand:
Serpent
Model:
SER600039-R
Condition:
Brand New
Write a review
Serpent made 1/8 Cobra E- red (SER600039-R) AWD drivetrain Electric Powered Off-Road Truggy RTR (Ready-to-Run)

  • Introduction

    The Serpent Cobra E-Truggy in RTR trim is an excellent basher kind car that'll just take many beating and its particular also a great package to begin with real battle ! On the basis of the Cobra E-Truggy it's the outright rate, great administration, dependability, rigidness and durability you need.

    The RTR package is truly dialed:
    -factory come up with racing chassis
    -prepainted and precut low kind truggy body and big composite backside wing
    -premounted truggy tyres/wheels/inserts
    -pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
    -2000kv brushless longbody engine (DragonRC)
    -Digital 2.4ghz transmitter (DragonRC)
    -Metal gear servo 16kg ( DragonRC-Savox)
    -3 oilfilled geardifferentials
    -Big bore shocks with synthetic dustboots and machined aluminium shocktowers
    -Spring steel transmission components and turnbuckles, front side and rear cvd driveshafts
    -Front and right back anti-roll bars
    -Large battery-cases with effortless felcron straps
    -Machined aluminium chassisplate
    -Fully ballraced
    -Batteries the automobile and transmitter are not included

    The bodyshell will come in orange, red, green, blue and red, also an obvious type.

    Serpent provides numerous optional elements with this specific vehicle to boost performance, lighter or for also nicer looks.

  • Main features

    Car
    Fully expert pre come up with and pre-set framework and electronic devices.

    Transmitter
    DragonRc 2.4 GHz steeringwheel sort transmitter with plenty settings and good range. Includes small and light receiver.

    Speedo
    DragonRC waterproof speedcontroller with a giant 150A ability to control the brushless motor and 4S or 6S battery pack power

    Motor
    DragonRC longbody 2000kV brushless engine with effortless colorcoded connectors

    Body
    Prepainted and pre-cut low e-Truggy human anatomy, in 4 primary colors orange, red, Green and Blue. ( additionally clear one available as optional)

    Tyres
    Premounted race ready tyres / tires with soft substances and pintype profile for amazing grip.

    Chassis
    Very slim 3mm 7075T6 aluminium framework, with machining regarding top face rendering it lighter in strategic areas and to get a handle on flex. Kick-up front for appropriate landings. Angled part to improve cornering clearance, and safe and simple mounting part guards with 5 screws. Countersunk holes, pouches to place the suspension brackets. Generally speaking the Truggy is designed to keep the fat really primary and towards the centerline as you can, to build a fantastic general stability.

    Side guards / battery pack trays
    Durable shaped composite component guards / battery power trays that continue with all the distinct the chassis, and mount with 5 screws each component. Front and sides sufficient to hold the dirt away. The guards/trays create numerous stability. The batteries are set up in longtudinal fashion, keeping the weight low inside vehicle. The battery pack trays features easy to use Serpent noticeable felcron TM straps to secure the batteries in place. Fits 2S and 3S batteries.

    Motormount:
    The engine lies within the most optimal spot in the automobile, maintaining motor-forces and transmission elements / alignment in your mind. Just one-screw is required to secure the BL motor, inside well developed durable machined aluminium motormount. Area for additional motor-cooling available as required. The space the motor allows mounting all popular buggy and (monster)truggy motors.

    Composite chassis braces
    Allows the chassis to flex which helps enhance bump handling. Front and rear.

    Front bumper
    Nicely curved front bumper, the same as about the Cobra buggy, to safeguard the key anti-roll club, suspension system system brackets, and moves inline with kick-up framework front for safe landings.

    front part suspension
    Very long and durable composite lower wishbones, coupled with upper spring-steel trackrods. 2 reduced shock-mount jobs. Downstops works extremely well as needed. Pivotball type anti-roll club rods.
    .
    Front steering / servo saver / angled
    Innovative angled front part steering create to cut back the angle of difference between the complete total caster and steering airplane. Therefore you will have less bump steer and a truer steering Ackerman through the whole range of suspension.

    Adjustable springtime packed servo-saver system with interchangeable Ackermann plates. Due to the design linked to the steering bell cranks whenever changing the Ackerman you may not should adjust your steering tie rods. You simply will simply need to adjust your end points by yourself radio.. quite simple to get usage of and set-up.

    The Inboard Bell crank keeps the lever and linkage into the vehicle. It is going to assistance with preventing harm to the steering system. Zero scrub radiuses on steering knuckle, assists in easing the jacking impact developed by your steering knuckle offset. It gives a far more direct dropped while keeping the automobiles framework more degree while turning.

    The front roll center can be changed quickly by going the steering knuckle shims for their appropriate locations.

    Topped of with a good composite top-plate.

    Front steering-block / c-hubs
    Very durable front part steeringblock / C-hub construction .

    Drive-shafts
    very long and lightweight springtime steel products with pressed in metal pins, laser-engraved. Exact same size front part and rear.

    Wheel-axles / wheel-nut
    Serpent springtime steel threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to help keep the massive truggy wheels/tyres on program.

    Captured universal joints
    Guarantees you will finish a race without loosing a pin or set screw. All components, axles and drive train elements have actually capture pins

    Front shocktower
    Light, strong and durable machined 5mm aluminium devices with 5 roles for shockangle.

    Shock-set front part and rear
    16mm big bore shocks, with difficult anodized accuracy threaded shock-bodies. Shockboots in silicone plastic to help keep the dust away . Chromed shock-shafts for supersmooth shockaction . The larger o rings offer less general anxiety and a better seal without dragging regarding shock shaft.

    Suspension brackets
    The hinge-pins / hingepin balls are captured in durable composite suspension system brackets . These capture the nylon roll-center inserts.

    Anti-roll club / anti-roll club linkage with pivotball
    The anti-roll pubs front and back are constructed with high quality unique springtime steel, and so are captured on diff-cased in ballbearing for perfect guidance and control.

    Receiver field / servo mount / speedo mount
    Composite one piece radiobox to firmly install servo� s, speedo and receiver. For maximum stability the light receiver fits the top-case effortless, with a small opening to permit cable to protrude. The speedo seats suprisingly low on a plate right above the framework, for that reason quick cables enables you to the motor. The servo is set up in a vertical fashion.

    Central diff
    Optimised main gear-diff with 50T super-hard spur-gear . Tiny, compact design to reduce rotating mass on max.

    Transmission shafts
    Durable but light and thin Serpent spring steel, laser etched shafts.

    front side and straight back diff
    Optimised gear-diff with superhard spur-gears . Tiny, compact design to cut back rotating mass towards the most. Identical variation front part and backside. Diff coupler in springtime metal seated in big barings for durability.

    Rear shocktower
    Light, strong and durable machined 5mm aluminum item with 5 positions for shockangle.

    Rear uprights
    Durable composite back uprights with 3 camber positions

    Suspension brackets rear
    Durable composite products with eccentric inserts to improve set-up.

    Rear wing mount
    The composite back wing mount, permits to change the angle about the straight back wing.

    Rear wing
    Two period high down force wing, has two degrees of angle, that also includes 2 fins. Helps improve down force and right line capability

    Bodymounts
    Nylon bodymounts with wider seating for the human anatomy, securely fastened on shocktowers.

    Super Minimal profile e-Truck Body
    Improves look and keeps the profile minimum. Comes precut and prepainted.

    Decals
    Applied to your human body.

    Oils / grease
    Car is put together with a top quality silicone natural oils for the diffs and shocks and black oil. Threadlock found in which needed.

    Manual
    Full color manual showing the car, specs, suggestions and exploded views. The transmitter and speedo have actually small split manuals included.

    Box
    Full color protective industry to re-use for car transportation or tyres.





Copyright © 2008-2024 rcjaz.com.au All rights reserved