Serpent X20 Chassis Flex Aluminium Honeycomb Upgrade - Arrowmax AM-950021  [AM-950021]

Price:
AUD$150.11
Brand:
Arrowmax
Model:
AM-950021
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Performance flex plate for Serpent X20

Arrowmax AM-950021 is a honeycomb-pattern aluminium chassis flex designed as an aftermarket upgrade for Serpent X20 cars. It does not change suspension geometry but alters chassis stiffness so builders can fine-tune mid-motor response on 1/10 electric touring platforms using the Medius X20 MID arrangement.

Technically the honeycomb profile offers a controlled bending behaviour that helps with traction and dynamic weight transfer in turns. Compared with flat aluminium sheets it remains lightweight while giving more repeatable flex. The plate usually replaces the stock flex element or mounts to existing points without moving primary components like the servo, ESC, or motor.

Since this is an accessory, confirm your chassis cutouts and screw boss positions. Trial-assemble to check wiring clearance and ensure no interference with the electronics bay or suspension arms before final torquing.

Specifications

  • Item: Chassis flex plate, aluminium honeycomb
  • Material: Aluminium
  • Model Number: AM-950021
  • Compatibility: Medius X20 MID carbon 1/10 EP (SER400033), Serpent X20

Fit this plate when you want a metal-based, repeatable flex characteristic for mid-motor Serpent X20 builds; check SER400033 layout details and adjust mounting torque carefully to dial in handling.

Does this require trimming to fit all X20 versions?

Most Serpent X20 variants share common boss layouts, but some factory chassis have different cutouts; check and trim only if absolutely necessary to avoid weakening mount points.

How should I set screw torque with this plate?

Start with a light, even torque and gradually increase while testing. Incremental tightening helps prevent stripping plastic bosses and lets you sense handling changes.

Will the honeycomb surface corrode?

Aluminium can oxidise but is generally low maintenance; wipe down after wet use and inspect for any damage to ensure consistent flex characteristics.

Can I pair this with stiffer suspension springs?

Yes, combining chassis flex changes with spring rate adjustments is a common tuning path. Make small changes and test to understand cumulative effects on handling.

Is the AM-950021 compatible with SER400033 carbon layouts?

The plate lists compatibility with Medius X20 MID carbon 1/10 EP (SER400033); still confirm hole patterns and clearances against your specific chassis before final installation.

Copyright © 2008-2026 rcjaz.com.au All rights reserved