Serrated Flange Titanium M4 Wheel Nuts for R/C - HUDY 296542-B, Blue  [HSP-296542-B]

HUDY 296542-B - Titanium NUT M4 With Serrated Flange - Blue (4)
Price:
AUD$37.35
Brand:
HUDY
Model:
HSP-296542-B
Condition:
Brand New
Write a review
alt="HUDY 296542-B - Titanium NUT M4 With Serrated Flange - Blue (4)" title="HUDY 296542-B - Titanium NUT M4 With Serrated Flange - Blue (4)"

Tuned Wheel Fasteners in Titanium

The HUDY 296542-B titanium M4 wheel nuts are designed as lightweight, precision fasteners for wheel mounting and fine chassis setup. The serrated flange provides positive bite on the wheel face to reduce loosening under vibration, while titanium construction lowers mass versus standard steel nuts.

Fitment is simple: hand-thread onto the M4 stud, then use an appropriate hex driver to clamp the nut against the wheel. Ensure the serrated flange seats consistently and verify wheel and hub alignment before applying final torque. Check the seating after initial track sessions.

As a tuning detail these nuts help cut unnecessary rotating weight and can remove the need for extra washers or heavy thread locker in many rigs. Use them where consistent clamp force and minimal rotational mass improve performance.

Specifications

  • Item: Titanium M4 wheel nuts, serrated flange, blue finish
  • Material: Titanium
  • Model Number: HUDY 296542-B
  • Compatibility: R/C cars with M4 wheel studs

These HUDY titanium M4 nuts suit tuners wanting lightweight, secure wheel fastening with an integrated serrated flange, delivered as a 4 pcs blue set.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do these nuts influence wheel balance and rotating mass?

Their lower mass compared with steel helps reduce rotating mass, which can aid balance at high revs. The benefit per wheel is small but cumulative across all wheels.

Should I adjust torque settings when switching to titanium?

Torque targets remain similar, but ensure the nut seats correctly and avoid over-torquing. Use a consistent driver to get repeatable clamp without stressing the threads.

Do these remove the need for washers?

In many setups the serrated flange provides the anti-rotation needed so additional washers are not required. Confirm fit and contact on your specific wheel face.

Will the serrations affect delicate wheel finishes?

The serrated flange bites into the wheel surface to prevent movement; on delicate finishes inspect fit and consider whether the flange contact is acceptable for your wheels.

Copyright © 2008-2026 rcjaz.com.au All rights reserved