SRX8 Gen4 GP Shock Stack Spacer for Fine Tuning 601357 Serpent  [SER601357]

How the spacer influences handling

The Serpent 601357 shock spacer is an RC-scale tuning part for SRX8 Gen4 GP chassis models. It adjusts the shock stack or preload location so you can change effective ride height and travel without altering spring stiffness or internal damping components.

By shifting the spacer inside the shock assembly you change leverage and the effective geometry of the suspension, which can correct front/rear balance and sharpen or soften turn-in depending on surface grip. These notes are specific to model setup considerations.

Installation guidance (general):

• Check that the spacer aligns cleanly with the shock shaft and the SRX8 Gen4 GP upper and lower mounting points before final tightening.
• Put the spacer where intended, reassemble the shock, then inspect for full travel and binding issues and confirm static ride height.
• Make small adjustments between runs to track handling trends rather than large one-time changes.

Tuning notes:

• Incremental spacer moves produce measured handling differences - ideal for fine tuning rather than sweeping setup shifts.
• Combine spacer placement with spring and damper changes for best results, and keep a log of each setting for repeatability.