Stabilizer Bar LA422-11 - Fit for Kyosho SB/ZX7.5/RB7.5  [KY-LA422-11]

Kyosho LA422-11 - Stabilizer Bar (?1.1)(SB/ZX7.5/RB7.5)
Price:
AUD$7.03
Brand:
Kyosho
Model:
KY-LA422-11
GTIN:
4548565524266
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $6.40 each $1.25 or 9%
3+ $6.08 each $2.84 or 13%
Write a review

Stabilizer purpose and installation notes

This Kyosho LA422-11 stabilizer bar is a replacement tuning part designed to refine roll behaviour on the compatible chassis named above. As a suspension tuning device, the bar modifies roll resistance during cornering and weight transfer, enabling balance changes without altering spring rates or damper settings.

Fitment is based on the chassis mounting points indicated by the model codes in the product title. Verify the bar aligns with your vehicle's linkage geometry and that any required mounting hardware is correct; swapping bars between setups often needs minor hardware changes. Use accepted RC workshop practice: secure fasteners to the small-model torque spec and inspect adjacent suspension components for wear or damage.

Consider the stabilizer an incremental tuning tool rather than a full handling overhaul. Small tweaks to bar rate or effective length can noticeably affect turn-in and mid-corner stability. Pair stabilizer adjustments with tyre selection and shock setup changes for consistent results on paved circuits or indoor layouts.

Compatibility

  • SB
  • ZX7.5
  • RB7.5
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How much effect will swapping stabilizer bars have on handling?

Changing the stabilizer can produce clear changes in turn-in and mid-corner balance. Expect incremental differences; try small changes and log results to understand the effect on your specific setup.

Should I retune shocks after altering the stabilizer?

Yes, stabilizer changes interact with damping. After swapping the bar make modest damper adjustments or change ride height as needed to restore desired balance between front and rear.

Is a field swap realistic between heats?

A field swap is practical with basic tools. Bring matching hex keys and spare mounting hardware, fit the bar, check fastener torque, and re-test for a couple of laps to confirm handling before the next heat.

Copyright © 2008-2026 rcjaz.com.au All rights reserved