Steering Lever Offset Spacer for Viper 990e R - Serpent 904226  [SER904226]

Price:
AUD$0.00
Brand:
Serpent
Model:
SER904226
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Steering lever spacer benefits for 1/10 touring cars

This Serpent 904226 spacer slips between the steering lever and its mount to shift the lever offset incrementally. It allows setup changes to steering geometry without touching the bellcrank or main chassis mounts, helping to refine steering feel and throw on 1/10 electric touring machines.

Fitment relies on the Serpent Viper 990e R mounting pattern. Verify hole spacing and lever spline clearance on your assembly before installation, since spacer thickness and alignment determine the final travel and clearance.

To install, remove the steering lever from its pivot, insert the spacer to the preferred offset, then reassemble and check the steering arc for smooth, full travel. Recheck toe and linkage angles after fitting to maintain consistent handling.

How do I fit this without introducing binding?

Ensure the spacer is flush with the lever face and that splines align. Reassemble carefully and cycle the steering through its range to catch any contact points early.

Will cornering balance change after fitting?

Yes, altering lever offset changes servo leverage and throw which can change initial turn-in and mid-corner steering. Make small adjustments and test on track to observe handling changes.

What determines clearance and throw once installed?

Spacer thickness and how the lever splines sit relative to the pivot determine final clearance and throw. Always check the full steering sweep after fitting.

Copyright © 2008-2026 rcjaz.com.au All rights reserved