Steering Lever Set for Viper 990e R - Serpent 904224  [SER904224]

Key facts about the steering levers

This steering lever set is an RC-scale replacement part designed for use in the Viper 990e R chassis. It is intended to replace damaged or worn steering linkage components and to return the steering system to its intended geometry.

Fit and role: fitted within the steering assembly, the levers convey servo motion to the steering knuckles and influence toe and initial steering response. Use these parts where maintaining original chassis behavior is required.

Installation notes: remove the servo saver or steering bellcrank as necessary, preserve usable original pins and hardware, inspect for full steering sweep clearance, and ensure all linkages are seated without binding. Follow the chassis manufacturer's guidance on threadlocking and fastener torque for metal-to-metal connections.

Tuning considerations: replacing steering levers is a standard maintenance action; after installation, verify servo endpoints, steering centring, and any Ackermann settings to match your previous setup or track requirements.

This note covers practical compatibility and install advice for the Serpent 904224 steering lever set as a service replacement for Viper 990e R users seeking reliable parts for repair and setup checks.