Super X Upgrade Rear Roll Stay Carbon 1.5mm - Tamiya 95716 Jr HG  [95716]

Tamiya 95716 Jr HG carbon rear roll stay suited to Super X chassis

The Tamiya 95716 Jr HG Carbon Rear Roll Stay is a 1.5mm carbon fibre rear stay supplied as a replacement part for Mini 4WD cars built on the Super X chassis. It is presented as a spare for tuners and maintenance work where the Super X mounting pattern is kept.

Cut from 1.5mm carbon sheet, the stay gives a firm mounting base for rear rollers while maintaining a low build height. It is intended for hobbyists seeking a direct-fit carbon component for Jr HG sized fittings on Super X cars, focusing on the mechanical fit and material strength rather than cosmetic polish.

Fitting needs standard Super X rear stay screws and spacers; take care when tightening to prevent crushing the laminate. Builders will note that 1.5mm carbon offers usable stiffness with slight compliance; shims and washers can help protect the hole edges and manage contact pressure.

Inspect mounting holes before installation for any delamination and confirm roller alignment against the bumper and plates. Finish exposed carbon edges with a light file to remove splinters and avoid altering hole positions unless you plan to ream and reinforce them for different screw sizes.

A no-nonsense carbon rear roll stay for Super X chassis applications; suitable as a spare or to replace worn components while preserving the original mounting layout.