Syncro KRG-331 Receiver KSS for KT Transmitters - Kyosho 82146  [KY-82146]

Kyosho 82146 - Syncro KRG-331 Receiver with KSS
Price:
AUD$63.48
Brand:
Kyosho
Model:
KY-82146
GTIN:
4548565402175
Condition:
Brand New
Write a review
alt="Kyosho 82146 - Syncro KRG-331 Receiver with KSS" title="Kyosho 82146 - Syncro KRG-331 Receiver with KSS"
alt="Kyosho 82146 - Syncro KRG-331 Receiver with KSS" title="Kyosho 82146 - Syncro KRG-331 Receiver with KSS"

Tuning-focused KSS receiver with gyro

The Kyosho 82146 Syncro KRG-331 Receiver with KSS is an accessory receiver module developed to add an adjustable stability layer to Syncro-compatible transmitters. KSS functionality is combined with gyro support to reduce steering corrections during cornering and to improve straight-line stability while you refine vehicle settings.

Designed for Syncro KT-series radios, the receiver handles broader stability duties so pilots can concentrate on transmitter trims and multi-parameter fine-tuning. Installation and wiring follow established small-scale receiver practice; the module links to servos and ESCs using the receiver channels defined by the Syncro protocol.

In practical tuning, the receiver provides a coarse stability overlay, while the transmitter remains responsible for precise steering feel, throttle curves, and endpoint adjustments. That layering helps when adjusting for understeer or oversteer and when smoothing throttle response on surfaces with changing traction.

Specifications

  • Item: Syncro KRG-331 Receiver with KSS
  • Material: Electronic module
  • Model Number: 82146
  • Compatibility: Syncro KT231P, KT231P+, KT331, KT432PT, KT431S, KT631ST
  • Key Feature: KSS stability system with gyro support for steering and throttle stability
  • Typical Use: Improve cornering control and straight-line stability while tuning transmitter settings

Compatible Models

  • Syncro KT231P
  • Syncro KT231P+
  • Syncro KT331
  • Syncro KT432PT
  • Syncro KT431S
  • Syncro KT631ST

As an add-on receiver module, the Kyosho 82146 KRG-331 with KSS is intended to streamline stability management for Syncro transmitters, enabling faster setup and more precise handling adjustments.

The receiver supplies a baseline of gyro-assisted stability, allowing you to concentrate on transmitter trims, endpoint settings and throttle curves for finer control without chasing basic corrections.
Yes. The module provides stability correction but throttle mapping and curve shaping remain functions to be adjusted within your transmitter for traction management.
The gyro acts as an overlay, so endpoint adjustments and servo configuration should still be performed in the transmitter to preserve desired steering travel and feel.
Use conservative KSS gains while softening throttle curves and adding expo where needed; refine in small steps until throttle transitions feel predictable.

Copyright © 2008-2026 rcjaz.com.au All rights reserved