T3'12 Front Shock Tower 3.0MM Graphite Racing Upgrade by Arrowmax AM-T3-303086  [AM-T3-303086]

3.0MM Front Tower for the T3'12 Front End

This Arrowmax part AM-T3-303086 is a 3.0MM graphite front shock tower designed for the T3'12 front end layout. The precision-machined graphite plate positions the front shocks at fixed points to simplify adjustments to shock angle, preload location, and roll-centre geometry during tuning sessions.

Fitting the tower is simple for cars already set up with the T3'12 front assembly: remove the OEM tower, align this unit to the factory holes, and reuse the original chassis screws and shock hardware. No specialist equipment is needed beyond standard hex drivers, and the tower works with common shock assemblies used on the chassis.

In practical tuning terms, this tower gives a reliable datum for front suspension geometry. Moving the shock mounting holes or altering tower thickness changes leverage and feedback, so make incremental tweaks and test on track to assess balance and response.