TA-05IFS Front Mount Aluminium Upgrade 1F TAMIYA 415-01/1F/V2 by 3Racing  [415-01/1F/V2]

Tamiya TRF 415 FF03 TA-05IFS TRF-416 Option Aluminium Suspension Mount (1F) - Ver. 2 - 3RACING 415-01/1F/V2
Price:
AUD$7.16
Brand:
3Racing
Model:
415-01/1F/V2
Condition:
Brand New
Write a review

Front 1F Mount Purpose

This Version 2 machined aluminium front suspension mount is produced to match the name and fit in the product title. It is an RC replacement part for the 1F front mounting position and provides increased local rigidity over plastic counterparts.

The mount is intended for use with TRF 415, FF03, TA-05IFS and TRF-416 style chassis. Always check that the 1F mounting points and clearances on your car match this part before installation.

Installation is straightforward: remove the original mount, transfer bearings or any inserts, and secure the aluminium unit with the original hardware if compatible. Confirm correct-length hex screws and proper thread engagement to avoid damage.

Tuning advice: installing an aluminium 1F mount reduces flex around the mounting area and can improve steering precision. Incorporate the change into a planned setup update and test incremental adjustments trackside.

Can I reuse the stock mount hardware?

Often yes, but you must confirm screw length and thread engagement. Replace any screw that does not seat properly or risks thread damage in the aluminium piece.

What handling changes should I expect?

Expect reduced compliance at the mount which can produce sharper steering and altered front-end feedback. Small suspension or toe adjustments may be needed to restore balance.

Should I use this part alone to fix handling?

No single part solves all handling issues. Use this mount as one part of a setup plan and validate each change with test runs.

Copyright © 2008-2026 rcjaz.com.au All rights reserved