TA07 Aluminium Front Suspension Mounts for Tamiya - JR-TA704-BK by Jazrider  [JR-TA704-BK]

Tamiya 58636 TA07 Aluminum Front Suspension Mount Set (Black)
Price:
AUD$8.64
Brand:
JAZRIDER
Model:
JR-TA704-BK
Condition:
Brand New
Write a review

Aluminium Front Suspension Mounts for TA07

Manufactured to fit the Tamiya TA07 chassis, this front mount set is listed under model JR-TA704-BK. The aluminium pieces are finished in black and are intended as direct replacements or upgrade parts for the TA07 front suspension mounting points.

Installing these mounts raises front-end rigidity in comparison to standard plastic mounts, which influences steering response, helps keep camber settings stable and modifies load transfer through the suspension. Ideal for drivers seeking crisper front steering or replacing worn plastic parts.

Basic RC assembly skills and standard tools are required for installation. Always verify part fitment, check fastener lengths and threads prior to tightening, and confirm full suspension travel and steering range after fitting. Apply thread-lock where appropriate on metal fasteners.

Will using stiffer mounts affect toe and camber under load?

Stiffer mounts reduce flex, which generally helps camber retention and can stabilise toe settings under cornering loads. Tuning changes elsewhere may be needed to balance handling.

Do I need different screws to install these?

Check the screw lengths and thread form from your original hardware; if replacements are required, match thread pitch and length to avoid interfering with suspension movement.

Are these suitable for regular track use?

Yes, aluminium mounts generally offer improved durability for frequent track running, but inspect them periodically for signs of stress or cracking, especially after heavy impacts.

Copyright © 2008-2026 rcjaz.com.au All rights reserved