Tamiya 42373 - 39mm Double Cardan Joint Drive Shafts (2pcs) for TC-01/TB-05 - Off-Road Durable Shafts  [42373]

Tamiya 42373 - 39mm Drive Shafts for Double Cardan Joint Shafts (2pcs) TC-01/TB-05
Price:
AUD$23.43
Brand:
Tamiya
Model:
42373
GTIN:
4950344423736
Condition:
Brand New
Available in warehouse
Write a review

Strengthen your RC drivetrain with Tamiya 39mm shafts

If you need greater drivetrain durability, the 39mm drive shafts from Tamiya are crafted for double cardan joint configurations. The shafts use durable steel for extended life, and the included needle pins are 10.8mm long, offering improved resistance to wear when paired with reinforced swing shaft caps.

Compatibility tips and practical use

These drive shafts fit Tamiya TC-01 and TB-05 PRO chassis and are suitable for direct coupling setups. They help maintain consistent power flow through angled joints. For correct fitment, use alongside Tamiya Item 42372 or the Item range 42218 to 42221.

Practical fitting guidance

Ensure the shafts are properly aligned with the double cardan joints during installation to prevent binding and reduce stress on the pins. Check joints regularly after rough runs to keep drivetrain performance reliable.

Can these fit on standard TB-05 models?

They are intended for the TB-05 PRO configuration and TC-01. If your TB-05 is a different variant, confirm dimensions and joint type before installing to avoid mismatch.

What performance benefit should I expect?

Expect smoother torque transfer at angles and reduced driveline vibration, which helps maintain traction and reduces stress on connected parts during demanding use.

How often should I inspect the shafts?

Inspect after heavy offroad sessions or every few runs. Look for pin looseness, play in the joints, and wear on swing shaft caps, and replace parts showing deterioration.

Copyright © 2008-2025 rcjaz.com.au All rights reserved