Tamiya 49465 Short White Springs Pack for GB01 GT-01  [49465]

Tamiya 49465 - RC TT Setting Spring Set - White/Short - For GB01, GT-01, TT-Gear
Price:
AUD$20.89
Brand:
Tamiya
Model:
49465
Condition:
Brand New
Write a review

Customise Your TamTech-Gear with Tamiya 49465

The Tamiya 49465 RC TT Setting Spring Set is a handy tuning pack for TamTech-Gear owners who like to experiment with suspension. It includes eight white short springs, four rated harder and four softer, created with GB01 and GT-01 chassis in mind. Use them to tune roll stiffness and traction for different driving conditions.

Compatibility Notes

These springs are intended for use on Tamiya GB01 and GT-01 vehicles and suit conventional short shock assemblies. They provide a quick way to change handling characteristics without replacing major suspension parts.

When to Use Hard or Soft Springs

Hard springs suit fast, flat tracks where minimal body roll is preferred. Soft springs help the tyres follow uneven ground and increase contact patch on bumpy surfaces. Choosing the right rate depends on surface, driving style and tyre choice.

Mixing rates front to rear or left to right can be used to fine tune understeer or oversteer. Many drivers use asymmetric spring setups to balance handling, but test carefully to avoid unpredictable behaviour.
Spring rate influences ride height under load; stiffer springs will sit higher with the same preload. Adjust preload collars to achieve desired static ride height after fitting new springs.
They are sized for GB01 and GT-01 TamTech-Gear layouts. If a vintage build uses those chassis standards they will fit, but confirm shock inner diameter and retainer type before purchasing for older or modified cars.
Keep springs clean and dry in a small parts box to prevent dust and corrosion. Store separated by rate so you can quickly grab the correct set during track sessions.

Copyright © 2008-2025 rcjaz.com.au All rights reserved