Tamiya 53432 Performance Pinion Set for TG10  [53432]

Tamiya 53432 - TGR 2-Speed Pinion Gear 17T/21T OP-432
Price:
AUD$13.91
Brand:
Tamiya
Model:
53432
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Gearing Upgrade Tailored to TGR Chassis

Refresh your Tamiya TGR chassis setup with the 53432 2-speed pinion set, featuring both 17-tooth and 21-tooth pinions to help you tailor gearing for different track demands. The pack is designed for use with the TG10 2-speed transmission used on compatible TGR models.

Reliable Meshing for Fast Runs

The Tamiya 53432 gears are engineered to provide dependable engagement when installed correctly, giving drivers predictable throttle response as they switch between the two pinion sizes.

Fast Fit and Go

Installation is a simple pinion swap on the TG10 2-speed gearbox: replace the existing pinion with the 17T or 21T, check mesh, then secure and test under light load before full-speed running.

Can I use the 53432 pinions on off-road setups?

These pinions are optimised for high-speed circuit use on TGR chassis with the TG10 2-speed transmission. Off-road use is possible, but check for debris protection and mesh stability in rough conditions.

How should I check gear alignment after fitting?

After fitting the 17T or 21T pinion, rotate the drivetrain by hand to confirm smooth engagement and listen for binding. Adjust mesh with shims if necessary and recheck before running.

Will changing pinions affect motor load?

Yes, changing between 17T and 21T alters the gear ratio and will affect motor load and RPM range. Make incremental changes and monitor motor temperature and battery draw when tuning.

Copyright © 2008-2025 rcjaz.com.au All rights reserved