Tamiya 54074 TB-03 Suspension Mount 1F Chassis Tuning [54074]

Tamiya 54074 - RC TB-03 Suspension Mount 1F OP-1074

Price:

AUD$15.90

Brand:

Tamiya

Model:

54074

GTIN:

4950344540747

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Tamiya - TB-03

Dial In Toe Settings for TB-03

Hobbyists aiming for more predictable handling can rely on the Tamiya 54074 Suspension Mount. Compatible with TB-03 and also appropriate for TRF416 and TB Evo 5MS chassis, it facilitates fine toe adjustments to stabilise mid corner behaviour.

Installation Modes and Fit Advice

The mount supports both upright and inverted installation to change steering characteristics. Some chassis arrangements may need small modifications to clear the mount; carefully remove material only where it interferes to preserve chassis strength.

Which chassis will accept this part?

The Tamiya 54074 is intended for TB-03 installations and is also compatible with TRF416 and TB Evo 5MS when mounted correctly.

Will fitting it weaken the chassis?

If trimming is limited to small non-structural tabs, chassis integrity is maintained. Avoid removing load-bearing sections and follow conservative trimming practices.

How should I test new toe settings?

Make incremental adjustments, run several laps between changes and note differences in turn-in, mid corner and exit to find the best compromise for your track.