Tamiya 55104 LF2200 LiFe 6.6V Pack with LF-6.6V DC Charger Bundle  [55104]

Tamiya 55104 - LiFe LF2200-6.6V Racing Battery Pack & LF-6.6V Battery DC Charger
Price:
AUD$305.71
Brand:
Tamiya
Model:
55104
Write a review

What the LF2200-6.6V pack and LF-6.6V charger include

This bundle pairs the LF2200-6.6V LiFe racing pack with the LF-6.6V DC charger to provide a compact charging and power solution for electric RC models. The components are manufactured for hobby use and routine charging management.

The charger needs a separate, stable DC input when not using a direct AC adapter; check the charger's input specifications before connecting any supply. Practice safe charging: use a non-flammable surface, observe the session, and avoid leaving packs unattended while charging.

In RC tuning and practice the set supports steady voltage output and controlled charging, helping to keep motor and ESC behavior predictable between runs. Use the charger to protect LiFe chemistry health and to stabilise pack voltage rather than to change mechanical setup.

Product specifications

  • Item Tamiya LiFe LF2200-6.6V Racing Battery Pack and LF-6.6V Battery DC Charger set
  • Material LiFe chemistry battery, electronic DC charger
  • Model Number 55104
  • Compatibility For RC electric models and LiFe-compatible charging systems

For RC hobbyists wanting to run LiFe chemistry, this matched pack and DC charger provide the essentials; verify power source compatibility and adhere to recommended charging procedures for safe, repeatable performance.

LiFe cells maintain a relatively flat voltage profile under load, which can reduce variance between runs. Keeping charge cycles consistent and using the charger to top up between outings helps preserve repeatable performance.
Secure the pack firmly in the battery bay with straps or foam to minimise movement. Proper mounting and tidy wiring reduce stress on connectors and extend reliable service life under typical hobby use.
Regularly inspect connector condition, avoid deep discharges, and store packs at recommended charge levels. Use the LF-6.6V charger to maintain correct charge and prevent excessive stress on the cells.
Refer to the charger manual for any settings; many DC chargers for LiFe have straightforward operation. Ensure your DC source matches the input requirements and connect the charger following the instructions.
Monitor temperature and any unusual sounds or smells. If the pack becomes hot or the charger behaves erratically, stop charging and inspect the system before attempting another charge.

Copyright © 2008-2026 rcjaz.com.au All rights reserved