Tamiya made 1/8 Trike Dancing Rider (57405) T3-01 Other R/C Motorcycles assembly kit
Lord of this Dance This R/C model installation kit creates the Dancing Rider, a supremely fun 3-wheeled model that gives a fantastic lean whenever cornering. A genuine body is included with all the kit, and was designed beneath the supervision of famed Japanese artist Atsushi Arino. It's molded in lightweight polycarbonate, and is sold with a molded motorist figure for an extra touch of fun.
T3-01 Chassis: created for Fun The T3-01 is a three-wheeled chassis made up of two primary sections (front and back) linked by a center link; the front section houses R/C equipment while the energy source, as the backside holds the built-in gearbox and engine. Positioned in the rear of leading area, the servo is applicable motion toward backside part, which in turn makes the front slim. Support hands are moved by the servo, which help the model to self-right when it turns onto its side. At the front, a telescopic fork has an integral coil springtime, while the rear features a cam-slide setup with cams on the rotating pitch axis: sliding left and right, they actuate the integrated coil spring to cushion a corner. A planetary differential gear is incorporated into the rear axle.
specsLength: 260mm Width: 135mm Height: 175mm Wheelbase: 196mm Tread (Rear): 91mm Tire Width/Diameter 21/61mm (front side), 25/59mm (back) Monocoque Chassis Rear-Wheel Drive Planetary Differential Gear Front Suspension: Telescopic Fork back Suspension: Cam-Slide Gear Ratio = 10.7:1 Needs a digital rate Controller (sold individually) Type 370 Motor included
individually Required Items2-Channel R/C System w/ESC R6/AA/UM3 batteries for transmitter Power supply