Tamiya 58259 1/10 Subaru Impreza TB-01 Rally Replica Kit  [58259]

Tamiya 58259 - 1/10 Subaru Impreza German Rally Champion Versi (TB-01)
Price:
AUD$186.86
Brand:
Tamiya
Model:
58259
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Classic Rally Character Rendered in 1/10 Scale

The Tamiya 58259 1/10 Subaru Impreza German Rally Champion replicates the Team Holzer Subaru that scored big in the 1999 German Rally Championships. The kit blends period-correct styling with a TB-01 chassis engineered for balanced, predictable handling.

TB-01 Chassis and Handling Traits

The TB-01 uses a full-time shaft-driven 4WD system that maintains traction and distributes power evenly. Independent double wishbone suspension all round helps the model negotiate corners with composure and gives a planted feel during acceleration.

Scale-Correct Body and Rugged Frame

Tamiya fashions the body from tough polycarbonate to mirror the original rally contours, while the ABS bathtub frame supports the drivetrain and electronics. The kit measures 442mm long and 186mm wide, with a 157mm tread front and rear and tyres sized 27mm by 69mm for authentic proportions.

Tuning Advice for Everyday Performance Gains

Keep the included 540 Type Motor for a reliable baseline, then experiment with gear ratios or motor types to alter acceleration and top speed. Upgrading wheel bearings, shocks, or using different tyres will noticeably affect cornering and response.

Specifications

  • Scale: 1/10
  • Chassis Type: TB-01
  • Overall Length: 442mm
  • Overall Width: 186mm
  • Chassis Weight: 1277g
  • Tread F/R: 157mm
  • Tire Width/Diameter F/R: 27/69mm
  • Gear Ratio: 9.91:1
  • Body: Polycarbonate
  • Frame: ABS bathtub type
  • Suspension: Four-wheel independent double wishbone
  • Motor: 540 Type Motor Included
  • Radio Control Unit: 2 Channel (available separately)

The Tamiya 58259 Subaru Impreza German Rally Champion TB-01 Kit suits both display collectors and club drivers who want a historically styled car with straightforward upgrade paths.

The chassis accepts standard 540-size motors; brushless units in the same size can be fitted but check motor height and pinion compatibility before installing.
This is a kit, so radio, battery, charger and optional electronics are required to run. The mechanical parts and body are supplied, but you will need to source a 2-channel radio and power system.
Inspect gears and shafts after heavy use and clean debris from the differential and driveshafts. Regular checks of gear mesh and lubrication will extend component life.
Many TB-01 hop-up parts are cross-compatible, especially upgrade bearings and hop-up suspension components, but verify part numbers for full compatibility.
Use polycarbonate-specific paints applied in light coats, and mask carefully for multi-colour liveries. Test fit decals before final painting to ensure accurate placement.

Copyright © 2008-2025 rcjaz.com.au All rights reserved