Tamiya made 1/20 Mammoth Dump Truck (58268) AWD drivetrain Off-Road Monster Trucks assembly kit
Tamiya 58268 - 1/20 RC Mammoth Dump Truck
This is the Tamiya 1/20th Scale Electrical, radio control Mammoth Dump Truck.
This durable kit is based on the earthshaking mammoth dump trucks used in major mining alongside heavy duty jobs.
FEATURES:
Effective shaft driven 4WD.
Two motors; one 540 size to push the wheels; one smaller engine with worm gear shaft for dump body operation.
Kit uses two channel radio for all functions, to raise bed end car and steer suitable for one or more second, return steering
to basic to get rid of increasing, steer kept for lowering. No significance of high priced three channel radios.
Fully functional dump human anatomy can hold as much as 8.8 lbs (4kg) of material for dumping.
Durable die-cast gears housed right in front and rear sealed gearboxes.
Four wheel suspension system equipped with coil and leaf spring surprise units.
Durable Juggernaut 2 Monster Truck chassis.
Cab and dump human anatomy are molded in surprise resistant plastic.
6-1/8" (156mm) diameter 2-3/8" (60mm) wide rubber tread tires pre- installed on synthetic metal finish tires.
INCLUDES:
One 1/20th Scale Electrical broadcast Control Mammoth Dump Truck with electronic rate control with Futaba J receiver plugs and Standard battery pack connectors, 6-1/8" (156mm) x 2-3/8" (60mm) rubber tread tires pre-mounted on plastic steel finish tires, one tube thread locking element, one 4-way wrench, two tubes of grease, plastic ties, flat blade screwdriver, body pins, dual sided tape, two hex wrenches.
NEEDS:
Radio: 2 channel pistol grip with two servos.
Battery: 7.2v flat stick pack.
Tools: big and little blade phillips screwdrivers, tweezers, modeling knife, long nose pliers, side cutters, scissors, pin vise
and plastic concrete.
SPECS: Length: 20-5/8" (525mm)
Width: 11-5/8" (295mm)
Height: 11-13/16" (300mm)
Weight: 12.2 pounds (5.5kg)
FEEDBACK:
For replacement bearings utilize:
1- 5x8 Gear Assembly
3- 5x11 Gear Assembly
1- 5x8 countertop Gearbox
1- 5X11 Counter Gearbox
1- 6x12 Driveshafts
2- 6x12 Front Uprights
2- 6x12 Rear Uprights
2- 3x7 Rack Gearbox
1- 5x8 Rack Gearbox
1- Tamiya MV1 4mm flanged steel bearing Rack Gearbox
2- Tamiya MV1 4mm flanged metal bearing L & R Rack Case Assem.
1- 5x8 L & R Rack Case Assembly
