Tamiya 58479 Raybrig HSV-010 TT01E Track Style Kit  [58479]

Tamiya 58479 - 1/10 RC Raybrig HSV-010 - TT01E
Price:
AUD$183.42
Brand:
Tamiya
Model:
58479
GTIN:
4950344584796
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Introduction to the Tamiya 58479 Raybrig HSV-010

The Tamiya 58479 Raybrig HSV-010 recreates the Super GT racer from Team Kunimitsu, complete with authentic body lines and period liveries seen on cars driven by Takuya Izawa and Naoki Yamamoto. The kit provides a lifelike polycarbonate shell that looks right at home on display racks or race paddocks.

Engineering of the TT-01E Platform

The TT-01E layout centres mass low thanks to its bathtub chassis, which improves handling by keeping the battery and motor close to the ground. Its fiberglass-reinforced nylon upper deck and gear covers add necessary rigidity, and the 3-piece tie rod system helps produce accurate steering input. With double wishbone suspension and front and rear differential gears, the chassis responds well to setup tweaks.

Scale Details and Handling Traits

LED headlights and taillights are included for realistic night running, while the supplied high-grip racing tyres on 6-spoke wheels deliver predictable traction for smooth circuit surfaces. These touches combine to give both a realistic look and competent performance.

Specifications

  • Scale: 1/10
  • Length: 441mm
  • Width: 191mm
  • Height: 118mm
  • Wheelbase: 257mm
  • Tread (Front & Rear): 157mm
  • Tire Width/Diameter (Front & Rear): 27/67mm
  • Chassis Type: Bathtub
  • Drive: Shaft-Driven Full-Time 4WD
  • Differential Gears: Front & Rear 3-Bevel
  • Suspension: 4-Wheel Double Wishbone
  • Dampers: Front & Rear Friction
  • Gear Ratio: 8.35:1
  • Motor: Type 540
  • ESC: Requires Electronic Speed Controller (sold separately)

Tamiya 58479 Raybrig HSV-010 supplies a stable chassis and accurate bodywork for hobbyists who want a race-ready aesthetic and the scope to upgrade handling components. It is well suited to track days and detailed builds.

Clean the tyres and consider a light tyre treatment or trimming for better bite. Ensure wheels are balanced and rims are firmly seated before running.
The LED setup is straightforward but requires basic soldering or connector work to hook into your power system. Follow the kit instructions for correct polarity.
Upgrading to oil-filled dampers and experimenting with sway bars or stiffer springs will noticeably refine handling and reduce body roll.
Adjusting pinion and spur gears will trade top speed for acceleration. Try small steps when changing ratios to find the right balance for your track.

Copyright © 2008-2025 rcjaz.com.au All rights reserved