Tamiya 58653 King Yellow G6-01 Off-Road 6WD School Bus Kit  [58653]

Tamiya 58653 - 1/18 King Yellow 6x6 G6-01 Chassis Off-Road
Price:
AUD$188.64
Brand:
Tamiya
Model:
58653
GTIN:
4950344586530
Condition:
Brand New
Available in warehouse
Write a review
alt="Tamiya 58653 - 1/18 King Yellow 6x6 G6-01 Chassis Off-Road" title="Tamiya 58653 - 1/18 King Yellow 6x6 G6-01 Chassis Off-Road"
alt="Tamiya 58653 - 1/18 King Yellow 6x6 G6-01 Chassis Off-Road" title="Tamiya 58653 - 1/18 King Yellow 6x6 G6-01 Chassis Off-Road"
alt="Tamiya 58653 - 1/18 King Yellow 6x6 G6-01 Chassis Off-Road" title="Tamiya 58653 - 1/18 King Yellow 6x6 G6-01 Chassis Off-Road"
alt="Tamiya 58653 - 1/18 King Yellow 6x6 G6-01 Chassis Off-Road" title="Tamiya 58653 - 1/18 King Yellow 6x6 G6-01 Chassis Off-Road"

King Yellow - A Six-Wheel School Bus That Can Scrub Trails

The quirky school bus look gets serious capability with the Tamiya 58653 King Yellow G6-01. This 1/10 R/C model combines an eye-catching body with the G6-01 six-wheel drive architecture, offering strong off-road performance and a forgiving build process.

Exterior and Fitment: Ready to Run and Paint

The polycarbonate body balances scale detail with durability. It includes roof lighting, a stop sign motif and a comprehensive sticker set with masks for precise painting. Paired with deep rims and 113mm tyres, the silhouette is as functional as it is bold.

What the G6-01 Chassis Brings

The G6-01 monocoque frame keeps components compact and protected. Power from the Type 540 motor is transmitted through a gear-driven setup into sealed gearboxes and three bevel differentials, supporting steady 6WD traction. The independent double wishbone suspension uses friction dampers for controlled articulation.

Tuning and Steering Possibilities

Factory steering uses a two-piece tie-rod system run by a single servo, offering a predictable feel. For advanced manoeuvres, add a separate transmitter that supports 4WS to unlock rear steering. The platform responds well to common upgrades like improved servos and tyre compounds.

Specifications

  • Length: 478mm
  • Width: 270mm
  • Height: 239mm
  • Wheelbase: 173mm + 126mm
  • Tread: 200mm (Front, Center, Rear)
  • Tire Width/Diameter: 68mm/113mm
  • Chassis: Monocoque Frame
  • Drive System: Gear-Driven 6WD
  • Differential Gears: 3-Bevel
  • Steering: 2-Piece Tie-Rod
  • Suspension: 6-Wheel Independent Double Wishbone
  • Gear Ratio: 18.03:1
  • Motor: Type 540

The Tamiya King Yellow G6-01 is an enjoyable mix of novelty and practical engineering. It is ideal for hobbyists who like to run and refine their rigs, offering scope for handling and appearance upgrades.

Yes, fitting a separate 4-channel transmitter enables rear-wheel steering if you add the required servo and linkage. That converts the setup to full 4WS for improved turning radius.
The 113mm tyres provide solid grip on loose and uneven surfaces, though specialised compounds or tread patterns can be swapped in for optimal mud or loose sand performance.
Inspect after every few runs in dirty conditions and perform a full check seasonally. Clean, relube and replace worn bearings to keep the drive efficient and quiet.
Use polycarbonate-specific paints and the included masks for best results. Keep coats light and build colour gradually to avoid runs and to preserve detail lines.
Check battery security, steering linkages, tyre tightness and confirm the electronics are mounted and wired correctly. A quick radio-range check is also recommended before pushing it hard.

Copyright © 2008-2025 rcjaz.com.au All rights reserved