Tamiya 69951 Metallic Primer Spray for Scale Models  [69951]

Pre-paint primer for metallic topcoats

Tamiya 69951 is a surface primer spray designed to prepare hobby scale models and Tamiya kits for metallic finishes. It gives a steady base coat that helps metallic paints adhere and reduces mottled patches, making final finishing easier to control.

Application: ensure parts are clean and dust-free before spraying. Lightly sand glossy areas with a suitable fine abrasive (800-1200 grit) and remove any sanding dust. Hold the can 20-30 cm from the part and apply several thin, even layers instead of a heavy single coat to prevent runs and excess texture.

Quick tips: always spray a test panel to confirm pattern and dry time. Leave short flash-off periods between passes (around 5-10 minutes depending on temperature) and follow the product label for full drying before applying metallic paint. Stable ambient temperature and low humidity help achieve consistent results.

Maintenance advice: the primer improves surface uniformity and adhesion but is not a buffing medium - allow complete cure before wet-sanding or polishing the topcoat. Keep the can stored upright in a cool ventilated area and follow standard aerosol safety practices while spraying.