Tamiya 9490173 Sticker/Mask Set — Compatible with Tamiya 58760 BMW M3 Sport Evo 1992  [9490173]

Price:
AUD$0.00
Brand:
Tamiya
Model:
9490173
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Livery decals and paint masks for RC shells

The Tamiya 9490173 sticker and mask set includes decals and shaped masking pieces intended for the Tamiya 58760 BMW M3 Sport Evo Jagermeister 1992 RC body. These components are aimed at helping modellers reproduce the car livery and at simplifying multi-stage paint work on the shell.

Items are delivered as pre-cut sticker sheets and masking pieces sized to suit the 58760 body layout. Apply decals for graphics and sponsor logos, and use the masks to protect adjoining sections during spraying. This product is only for scale model bodies and must not be used on road vehicles.

Fitment advice: make sure the body is clean and dry before applying, position decals carefully and press from center to edge to limit air bubbles. For painting, ensure masks are firmly adhered around edges to prevent paint bleeding and allow paint to harden before removing the masks.

Care guidance: avoid solvent-based cleaners over the decal surfaces, and wait until adhesives and paints are fully set before handling or running the model at speed. Replace any worn stickers to keep the finish looking factory-fresh.

The decals and masks are produced to match the contours of the 58760 shell closely. Minor adjustments may be required on imperfectly trimmed or modified bodies.
Press mask edges firmly, consider using a light tack coat first, and apply paint in several thin passes rather than one heavy coat to minimise seepage.
If a decal lifts, clean the area, re-seat the sticker with firm pressure and a small amount of model-safe adhesive if needed, then allow full cure before reuse.

Copyright © 2008-2026 rcjaz.com.au All rights reserved