Tamiya CC-02 Aluminum Rear Lower Link Arms - JR-CC210-RD by Jazrider  [JR-CC210-RD]

Upgrade Details: Rear Lower Link Arms

This rear lower suspension link kit is designed for Tamiya CC-02 chassis use and carries the model designation JR-CC210-RD. The copy discusses fitment, install flow, and the functional role these links play in tuning a scale trail or crawler rig.

Made from aluminum to replace stock plastic links, the parts reduce deflection and preserve alignment when the vehicle is loaded. As a hop-up they alter rear axle placement, roll center and anti-squat characteristics in concert with the CC-02's standard mounts and linkage. Record your baseline setup before changing several linkage points so you can measure effects precisely.

Installation guidance: the arms mount to the factory rear points on the CC-02 using the chassis fasteners. Confirm ball stud orientation and thread type to prevent cross-threading or mismatched lengths between front and rear. Perform a static alignment inspection and a brief low-speed trial to ensure no interference with the axle or driveshafts.

Service and setup: aluminium links hold geometry but can transfer higher impacts to nearby plastic pivots and mounts; check those items after initial trials. Apply small incremental adjustments to link angles and lengths and tune dampers and ride height to reach balanced handling characteristics.