TAMIYA CC-02 Precision Shock Tower (Front/Rear) - JR-CC203-BK by JAZRIDER  [JR-CC203-BK]

Tamiya CC-02 Chassis Aluminum Front/Rear Shock Tower (Black)
Price:
AUD$16.17
Brand:
JAZRIDER
Model:
JR-CC203-BK
Condition:
Brand New
Write a review

Performance and Fit for the CC-02

The JAZRIDER JR-CC203-BK is an aluminium front and rear shock tower crafted for the TAMIYA CC-02 chassis. It replaces the stock plastic tower with a stiff metal plate to provide a more rigid shock mounting point and more definite feedback when adjusting suspension settings.

Fitting the tower is straightforward on a CC-02 using the original screw bosses and standard hardware. When installing, confirm shock shaft alignment and check for any interference with suspension arms or body mounts before final torque. Use the included screws or suitable hex fasteners to match the countersunk holes in the new tower.

As an upgrade, this tower gives a firmer anchor that helps tuning be more repeatable; reduced flex at the mounts compared with plastic makes small spring or damping changes more apparent. It pairs well with upgraded shocks for trail and crawl setups to refine compression and rebound response.

How does this affect tuning precision?

The stiffer mounting reduces flex at the shock anchors, making spring and damper adjustments register more predictably and allowing finer tuning of compression and rebound.

Any tips for aligning shocks during install?

Install the tower loosely at first, set the shocks in place to verify shaft alignment, and then tighten incrementally while checking clearance to suspension arms and the body.

Should I use this with upgraded shocks?

Yes — pairing the aluminium tower with higher-quality shocks helps take full advantage of the firmer mounting, improving consistency in compression and rebound tuning on technical terrain.

Copyright © 2008-2026 rcjaz.com.au All rights reserved